HardLabs

Default

pete529·PICO_Drone_Mk1·hardware/layouts/default/default.kicad_pcb

Default PCB layout, top view — open source RP2040/RP2350 board by pete529
Simulate this board

About the Default PCB

Default is an open source RP2040/RP2350 PCB design by pete529, published on GitHub under the MIT license. It is a 2-layer board measuring 14.4 × 40 mm, with 21 components from 13 distinct parts.

Its main chip is the Pico 2 W, from the RP2040/RP2350 family. Other key parts include the BMP280, DRV8833PWPR, GY-91 and NEO-6M. By type, the board carries 6 ICs, 5 connectors, 5 resistors, 2 LEDs, 2 capacitors and 1 switch.

It belongs with the robotics & motion, sensors and iot & wireless designs in this gallery.

From the project

Raspberry Pi Pico 2W mini Drone Project

Status: ✅ Hardware design complete and ATO builds are green. BOM is populated (see hardware/build/builds/default/default.bom.csv). All hardware has been procured and is ready for PCB assembly.

Build Output: - build/builds/default/ - Main quadcopter design files - build/builds/testpickable/ - Component testing files - KiCad PCB files (.kicadpcb) - Bill of Materials (.bom.csv) - Netlists and component reports

Main components on the Default

BMP280DRV8833PWPRGY-91Pico 2 WNEO-6M

Default bill of materials (BOM)

21 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
BMP280
Bosch Sensortec
U1
2
DRV8833PWPR
Texas Instruments
U2, U3
1
GY-91
Generic
U4
1
Pico 2 W
Raspberry Pi
U5
1
NEO-6M
u-blox
U6
4
B2B-PH-SM4-TB
JST
J1, J2, J3, J4
1
PIM485
Pimoroni
J5
1
SKTDLDE010
ALPSALPINE
SW1
1
KT-0603G
Hubei KENTO Elec
LED1
1
KT-0603R
Hubei KENTO Elec
LED2
2
CL05B104KO5NNNC
100nF ±10% 16V X7R
Samsung Electro-Mechanics
C1, C2
4
0402WGF1002TCE
10kΩ ±1% 62.5mW
UNI-ROYAL(Uniroyal Elec)
R1, R2, R3, R5
1
0402WGF1001TCE
1kΩ ±1% 62.5mW
UNI-ROYAL(Uniroyal Elec)
R4

Default design files

The KiCad project lives in the pete529/PICO_Drone_Mk1 repository on GitHub; these links point at the commit this page was built from.

Default: common questions

What microcontroller does the Default use?

The Default is built around the Pico 2 W, from the RP2040/RP2350 family.

How big is the Default PCB?

The Default measures 14.4 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Default?

21 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Default design files?

From the pete529/PICO_Drone_Mk1 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Default design in my own project?

Yes, under the terms of its MIT license, which pete529 chose for the repository.

Can I test firmware for the Default without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in PICO_Drone_Mk1

Similar boards