Smart poop bucket
peterxn123·smart-poop-bucket·pcb/smartpoopbucket.kicad_pcb
About the Smart poop bucket PCB
Smart poop bucket is an open source ESP32 PCB design by peterxn123, published on GitHub. It is a 2-layer board measuring 49 × 23 mm, with 11 components from 9 distinct parts.
Its main chip is the XIAO-ESP32-S3-SMD, from the ESP32 family. Other key parts include the A-. By type, the board carries 1 IC and 1 module.
From the project
Smart 3D printer poop bucket. Track your poop with the web interface.
Smart 3D printer poop bucket suitable for the Bambu A1. Track your poop with the web interface. Uses a Xiao ESP32-S3, HX711 and a 50kg load cell. This very handy tool makes it easier to manage your (printer) poop, by allowing you to monitor live your poop grammage for each print. As I'm sure you know, the slicer's estimate is only just that - an estimate - and so when it is important to know the total filament usage, for example when calculating the cost of a 3D print to sell, this handy tool allows you to see the exact weight of poop output by the printer per print. Uses the public HX711…
Main components on the Smart poop bucket
Smart poop bucket bill of materials (BOM)
11 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-S3-SMD | XIAO-ESP32S3-SMD | U1 |
| 1 | A- | SolderWirePad_1x01_SMD_1x2mm | A-1 |
| 2 | E- | SolderWirePad_1x01_SMD_1x2mm | BLK1, E-1 |
| 1 | DT | SolderWirePad_1x01_SMD_1x2mm | DT1 |
| 2 | E+ | SolderWirePad_1x01_SMD_1x2mm | E+1, RED1 |
| 1 | GND | SolderWirePad_1x01_SMD_1x2mm | GND1 |
| 1 | SCK | SolderWirePad_1x01_SMD_1x2mm | SCK1 |
| 1 | VCC | SolderWirePad_1x01_SMD_1x2mm | VCC1 |
| 1 | A- | SolderWirePad_1x01_SMD_1x2mm | WHT1 |
Smart poop bucket design files
The KiCad project lives in the peterxn123/smart-poop-bucket repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/smartpoopbucket.kicad_pcb
- Schematicpcb/smartpoopbucket.kicad_sch
- BOMBOM.csv
Smart poop bucket: common questions
What microcontroller does the Smart poop bucket use?
The Smart poop bucket is built around the XIAO-ESP32-S3-SMD, from the ESP32 family.
How big is the Smart poop bucket PCB?
The Smart poop bucket measures 49 × 23 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Smart poop bucket?
11 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Smart poop bucket design files?
From the peterxn123/smart-poop-bucket repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Smart poop bucket design in my own project?
The repository has no license, so all rights stay with peterxn123. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Smart poop bucket without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k