Neutec repeater hardware
phastmike·neutec-repeater-hardware·CT1ENQ_CT1EYN/bottom/RepeaterController.kicad_pcb
About the Neutec repeater hardware PCB
Neutec repeater hardware is an open source PCB design by phastmike, published on GitHub. It is a 2-layer board measuring 95 × 75 mm, with 54 components from 43 distinct parts.
Other key parts include the NE555D, L7805 and NE567. By type, the board carries 21 capacitors, 13 resistors, 4 transistors, 4 connectors, 3 ICs and 3 diodes.
It belongs with the rf & radio designs in this gallery.
From the project
Contains KiCad files for the Neutec Repeater Project. Firmware is on a different repository
Este documento visa guiar e documentar o projecto Repetidor Neutec.
O projecto surge de um contacto informal do Costa (CT1EYN) comigo (CT1ENQ), cujo objectivo inicial seria documentar a parte de controlo que o Costa (CT4QC) fez no repetidor de UHF de Guimarães para posteriormente as aplicar num repetidor de origem da Neutec que não cumpria os requisitos legais.
Main components on the Neutec repeater hardware
Neutec repeater hardware bill of materials (BOM)
54 components, 43 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555D | DIP-8_W7.62mm | U1 |
| 1 | L7805 | TO-220-3_Horizontal_TabDown | U2 |
| 1 | NE567 | DIP-8_W7.62mm | U3 |
| 2 | BC548B | TO-92_Inline_Wide | Q1, Q3 |
| 1 | BC558C | TO-92_Inline_Wide | Q2 |
| 1 | BC327 | TO-92_Inline_Wide | Q4 |
| 3 | Conn_01x02 | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J1, J3, J4 |
| 1 | Conn_01x08 | Molex_KK-254_AE-6410-08A_1x08_P2.54mm_Vertical | J2 |
| 1 | Jumper | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 2 | G5V-2 (Matsushita DSBT2-S-DC12V) | Relay_DPDT_Omron_G5V-2 | K1, K2 |
| 1 | 100k | Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 1M | Potentiometer_Bourns_3296W_Vertical | RV2 |
| 1 | 22k | Potentiometer_ACP_CA9-V10_Vertical | RV3 |
| 2 | 1N4148/1N4001 | D_A-405_P7.62mm_Horizontal | D1, D3 |
| 1 | LED 3mm | LED_D3.0mm | D2 |
| 3 | 330p | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2, C13 |
| 1 | 1u | C_Disc_D3.4mm_W2.1mm_P2.50mm | C3 |
| 4 | 27p | C_Disc_D5.0mm_W2.5mm_P2.50mm | C4, C7, C18, C20 |
| 1 | 47u/25V | CP_Radial_D6.3mm_P2.50mm | C5 |
| 1 | 100n | C_Disc_D5.0mm_W2.5mm_P2.50mm | C6 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0.33u | C_Disc_D5.0mm_W2.5mm_P2.50mm | C8 |
| 1 | 470n | C_Disc_D7.0mm_W2.5mm_P5.00mm | C9 |
| 1 | 330p | C_Disc_D5.0mm_W2.5mm_P5.00mm | C10 |
| 1 | 100n Polyester | C_Rect_L11.5mm_W3.6mm_P10.00mm_MKT | C11 |
| 1 | 0.1u | C_Disc_D5.0mm_W2.5mm_P2.50mm | C12 |
| 1 | 47u/25V | CP_Radial_D5.0mm_P2.50mm | C14 |
| 1 | 1u/25V | CP_Radial_D5.0mm_P2.50mm | C15 |
| 1 | 27p | C_Disc_D5.0mm_W2.5mm_P5.00mm | C16 |
| 1 | 2.2n | C_Disc_D5.0mm_W2.5mm_P2.50mm | C17 |
| 1 | 2.2u/25V | CP_Radial_D5.0mm_P2.50mm | C19 |
| 1 | 10n * | C_Disc_D5.0mm_W2.5mm_P2.50mm | C21 |
| 2 | 1.5M | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R3 |
| 1 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2 |
| 1 | 15k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 33k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R5 |
| 1 | 2k7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R6 |
| 1 | 150 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R7 |
| 1 | 1k8 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R8 |
| 1 | 2k2 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R9 |
| 1 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R10 |
| 1 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R11 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12 |
| 1 | 1k8 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R13 |
Neutec repeater hardware design files
The KiCad project lives in the phastmike/neutec-repeater-hardware repository on GitHub; these links point at the commit this page was built from.
Neutec repeater hardware: common questions
How big is the Neutec repeater hardware PCB?
The Neutec repeater hardware measures 95 × 75 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Neutec repeater hardware?
54 components, from 43 distinct parts. The full bill of materials is listed on this page.
Where can I download the Neutec repeater hardware design files?
From the phastmike/neutec-repeater-hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Neutec repeater hardware design in my own project?
The repository has no license, so all rights stay with phastmike. Use it as a reference, and ask the author before reusing the design.
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568