Programmer
About the Programmer PCB
Programmer is an open source PCB design by PHS-SMCS, published on GitHub. It is a 2-layer board measuring 14 × 35 mm, with 11 components from 7 distinct parts.
Other key parts include the CH340N. By type, the board carries 3 resistors, 2 capacitors, 1 IC and 1 switch.
It belongs with the usb & debug tools designs in this gallery.
From the project
Falconia Beacon is an ATTINY816-based, CR2032-powered LED beacon board used to make the Falconia rover visible to the SMCS Pi-in-the-sky satellite.
Falconia Beacon is an ATTINY816-based, CR2032-powered LED beacon board used to make the Falconia rover visible to the SMCS Pi-in-the-sky satellite.
- Blinks onboard LEDs so the satellite can detect the rover location. - Uses a potentiometer to enable or disable the blinking program. - Supports I2C control at address 0x42.
- PCB/ Hardware design and manufacturing assets: - KiCad schematic and PCB files - 3D models and custom footprints/symbol libraries - Panelization and production outputs
Main components on the Programmer
Programmer bill of materials (BOM)
11 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH340N | JEITA_SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 3 | YTC1P-6030-01 | SMD-1_BD2.0-H10.0 | +5V1, GND1, PROG1 |
| 1 | SK12D07VG3_C431547 | SW-TH_SK12D07VG3 | SW1 |
| 1 | TYPE-C_16PIN_2MD_073_ | USB-C-SMD_TYPE-C-6PIN-2MD-073 | USB1 |
| 2 | 100nF | C_0402_1005Metric | C1, C2 |
| 1 | 10kΩ | R_0402_1005Metric | R1 |
| 2 | 5.1kΩ | R_0805_2012Metric | R16, R17 |
Programmer design files
The KiCad project lives in the PHS-SMCS/Falconia-Beacon repository on GitHub; these links point at the commit this page was built from.
Programmer: common questions
How big is the Programmer PCB?
The Programmer measures 14 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Programmer?
11 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Programmer design files?
From the PHS-SMCS/Falconia-Beacon repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Programmer design in my own project?
The repository has no license, so all rights stay with PHS-SMCS. Use it as a reference, and ask the author before reusing the design.
More boards in Falconia-Beacon
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703
XG Station Power
54.3 × 91 mm9 parts2LCC-BY-4.0703
FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0490
Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389
Adapter tsop48 solder
48 × 33 mm3 parts2LGPL-3.0389
Adapter soic8 solder
48 × 20 mm3 parts2LGPL-3.0389