Rc ramrom
PickledDog·rc-ramrom
About the Rc ramrom PCB
Rc ramrom is an open source PCB design by PickledDog, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 99.1 × 49.9 mm, with 23 components from 16 distinct parts.
Other key parts include the EPROM, AS6C1008, 74HCT4075, 74HCT74 and 74HCT138. By type, the board carries 6 jumpers, 5 ICs, 5 capacitors, 4 resistors, 2 diodes and 1 connector.
It belongs with the retro computing designs in this gallery.
From the project
Pageable RAM/ROM card for RC2014
The ports are chosen to have the same organization as the SC114 Motherboard, and the ROM control address is common to most Z80 retrocomputers (the official RC2014 RAM/ROM cards included). As such, this board is basically the SC114's memory subsystem, in card form, with the addition of selectable page size and address.
The specified parts are just the ones I used, and can be substituted as needed - Mouser links provided for convenience and reference. A ZIF socket can be used for the EPROM - these are best sourced from eBay.

Main components on the Rc ramrom
Rc ramrom bill of materials (BOM)
23 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | EPROM | DIP-28_W15.24mm_Socket_LongPads | U1 |
| 1 | AS6C1008 | DIP-32_W15.24mm_LongPads | U2 |
| 1 | 74HCT4075 | DIP-14_W7.62mm_LongPads | U3 |
| 1 | 74HCT74 | DIP-14_W7.62mm_LongPads | U4 |
| 1 | 74HCT138 | DIP-16_W7.62mm_LongPads | U5 |
| 1 | RC2014 | PinHeader_1x39_P2.54mm_Vertical | J1 |
| 1 | Size1 | PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | Size2 | PinHeader_1x03_P2.54mm_Vertical | JP2 |
| 1 | A15 | PinHeader_1x03_P2.54mm_Vertical | JP3 |
| 1 | A14 | PinHeader_1x03_P2.54mm_Vertical | JP4 |
| 1 | A13 | PinHeader_1x03_P2.54mm_Vertical | JP5 |
| 1 | A Swap | PinHeader_2x02_P2.54mm_Vertical | JP6 |
| 2 | Green | LED_D3.0mm | D1, D2 |
| 5 | 0.1uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C3, C4, C5 |
| 2 | 470R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4 |
Rc ramrom design files
The KiCad project lives in the PickledDog/rc-ramrom repository on GitHub; these links point at the commit this page was built from.
- Layoutrc-ramrom.kicad_pcb
Rc ramrom: common questions
How big is the Rc ramrom PCB?
The Rc ramrom measures 99.1 × 49.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rc ramrom?
23 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rc ramrom design files?
From the PickledDog/rc-ramrom repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Rc ramrom design in my own project?
Yes, under the terms of its Apache-2.0 license, which PickledDog chose for the repository.
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k