19 open source boards using the AS6C1008
Real designs built with the AS6C1008, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
SNES AdvancedFlash 1-2
MouseBiteLabs
116.2 × 77.7 mm59 parts2LCC-BY-SA-4.068- schematic only · 84 parts
Nanocomp6809
breadboardinglabs
84 partsApache-2.024 RP2040/RP2350
Econopet
DLehenbauer
262.5 × 108 mm284 parts2LCC0-1.018RP2040/RP2350
Commodore pet clone
DLehenbauer
262.5 × 108 mm258 parts2LCC0-1.013FISC
DoctorWkt
231.3 × 96.5 mm59 parts2LGPL-3.07Rc-640k
PickledDog
99.1 × 49.9 mm11 parts2LApache-2.03Xt isa umb
zyga64
94 × 60.5 mm14 parts2LNo license2Rc-256page
PickledDog
99.1 × 49.9 mm12 parts2LApache-2.02Rc z80ram
PickledDog
99.1 × 49.9 mm18 parts2LApache-2.01Rc ramrom
PickledDog
99.1 × 49.9 mm23 parts2LApache-2.00V40 64K 640K ISA
homebrew8088
145.8 × 91.4 mm23 parts2LGPL-3.0238PIC
SNES HiROM Flash 1-2
MouseBiteLabs
116.2 × 77.7 mm52 parts2LCC-BY-SA-4.068RP2040/RP2350
Rp6502
clintonimaroo
150 × 100 mm50 parts2LNo license0PIC
SNES LoROM Flash 1-2
MouseBiteLabs
112.2 × 77.7 mm52 parts2LCC-BY-SA-4.068Memory
depletionmode
51.4 × 57.2 mm13 parts2LNo license2PIC
SNES Advanced UV 1-0 new
MouseBiteLabs
116.2 × 79.2 mm47 parts2LCC-BY-SA-4.068MemExpansion
ja1umi
155 × 114 mm27 parts2LMIT10PIC
SNES Basic UV 1-1
MouseBiteLabs
110.2 × 77.8 mm40 parts2LCC-BY-SA-4.06864K 640K ISA
homebrew8088
104 × 73.9 mm12 parts2LGPL-3.0238
How designs wire the AS6C1008
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the AS6C1008 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 11 of 13 designs, most often 100 nF (then 4.7 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1 | Connected to: Not connected 100% | — |
| VSSpin 16 | Connected to: GND 92% | — |
| VCCpin 32 | Connected to: 5V 92% |
|
29 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 64K 640K ISA by homebrew8088, SNES Advanced UV 1-0 new by MouseBiteLabs, Econopet by DLehenbauer and Commodore pet clone by DLehenbauer.
The AS6C1008 in open source designs
The gallery holds 19 open source boards using the AS6C1008 from 14 GitHub repositories; a typical one measures about 114.2 × 77.7 mm and carries around 40 components.
100% are two-layer designs, the rest use four layers or more, and 84% carry an open source license.
The most starred is V40 64K 640K ISA by homebrew8088.
Parts used alongside the AS6C1008
Microcontrollers on boards using the AS6C1008
What boards using the AS6C1008 are built for
AS6C1008: common questions
Where can I find a AS6C1008 reference design?
Each of the 19 boards on this page is a real design using the AS6C1008. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the AS6C1008 VCC pin?
The VCC pin has a decoupling capacitor on 11 of 13 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 13 open source designs using the AS6C1008.
What parts are used alongside the AS6C1008?
The 74LS245, 74HCT138, 74LS145, W65C02S and 74HCT174 appear in the most repositories here.
Which microcontrollers do boards using the AS6C1008 use?
Most are built on PIC (5) and RP2040/RP2350 (3).
How big is a typical board using the AS6C1008?
The median is 114.2 × 77.7 mm, and 100% are two-layer designs.
What is the most popular open source board using the AS6C1008?
By GitHub stars, V40 64K 640K ISA by homebrew8088, with 238 stars.
Can I simulate one of these boards using the AS6C1008 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.