Rc rom
PickledDog·rc-rom
About the Rc rom PCB
Rc rom is an open source PCB design by PickledDog, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 99.1 × 49.9 mm, with 22 components from 17 distinct parts.
Other key parts include the 27C512, 74HCT138, 74HCT74 and 74HCT4075. By type, the board carries 6 jumpers, 4 ICs, 4 capacitors, 4 resistors, 2 connectors and 2 diodes.
It belongs with the retro computing designs in this gallery.
From the project
ROM card for RC2014
If the PAGE signal cannot be connected, any RAM in the system will need to be configured to not appear in the lower memory addresses used by the ROM - consult the documentation of the RAM board. PD101 cannot selectively disable memory like this, and requires the PAGE signal in order to work with this board. Alternatively, PD106 can be built instead of this board, since it has RAM built-in and doesn't require the Enhanced bus.

Main components on the Rc rom
Rc rom bill of materials (BOM)
22 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 27C512 | DIP_Socket-28_W11.9_W12.7_W15.24_W17.78_W18.5_3M_228-1277-00-0602J | U1 |
| 1 | 74HCT138 | DIP-16_W7.62mm_LongPads | U2 |
| 1 | 74HCT74 | DIP-14_W7.62mm_LongPads | U3 |
| 1 | 74HCT4075 | DIP-14_W7.62mm_LongPads | U4 |
| 1 | RC2014 | PinHeader_1x39_P2.54mm_Vertical | J1 |
| 1 | RC2014_Enh | PinHeader_1x10_P2.54mm_Vertical | J2 |
| 1 | Size1 | PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | Size2 | PinHeader_1x03_P2.54mm_Vertical | JP2 |
| 1 | A15 | PinHeader_1x03_P2.54mm_Vertical | JP3 |
| 1 | A14 | PinHeader_1x03_P2.54mm_Vertical | JP4 |
| 1 | A13 | PinHeader_1x03_P2.54mm_Vertical | JP5 |
| 1 | A Swap | PinHeader_2x02_P2.54mm_Vertical | JP6 |
| 1 | Yellow | LED_D3.0mm | D1 |
| 1 | Green | LED_D3.0mm | D2 |
| 4 | 0.1uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C3, C4 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 2 | 470R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4 |
Rc rom design files
The KiCad project lives in the PickledDog/rc-rom repository on GitHub; these links point at the commit this page was built from.
- Layoutrc-rom.kicad_pcb
Rc rom: common questions
How big is the Rc rom PCB?
The Rc rom measures 99.1 × 49.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rc rom?
22 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rc rom design files?
From the PickledDog/rc-rom repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Rc rom design in my own project?
Yes, under the terms of its Apache-2.0 license, which PickledDog chose for the repository.
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k