ESP32-Lipo-Powersupply
About the ESP32-Lipo-Powersupply PCB
ESP32-Lipo-Powersupply is an open source PCB design by pierretek, published on GitHub. It is a 2-layer board measuring 29.7 × 47.6 mm, with 35 components from 23 distinct parts.
Other key parts include the BQ24070_CHG, BQ29700_PROT, TPS63001DRCR and JST_XH_2.544MM. By type, the board carries 12 capacitors, 12 resistors, 4 ICs, 2 connectors, 2 diodes and 1 transistor.
It belongs with the power & battery designs in this gallery.
From the project
PCB files for a lithium battery charging circuit and ESP32 power supply
A 3.7V LiPo battery charging circuit coupled with a buck-boost converter to provide steady 3.3V for an ESP32
Main components on the ESP32-Lipo-Powersupply
ESP32-Lipo-Powersupply bill of materials (BOM)
35 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ24070_CHG Texas Instruments | BQ24070RHLR | U1 |
| 1 | BQ29700_PROT Texas Instruments | BQ29700DSER | U2 |
| 1 | TPS63001DRCR Texas Instruments | TPS63001DRCR | U3 |
| 1 | JST_XH_2.544MM JST_XH_2.544mm JST | S2B-XH-A-_LF_SN | U4 |
| 1 | FS8205A_DMOSFET FUXINSEMI | FS8205A_C908265 | Q1 |
| 2 | CONN_01X15_SOCKET Conn_01x15_Socket | PinSocket_1x15_P2.54mm_Vertical | J2, J3 |
| 1 | TYPE-C-31-M-12 Korean Hroparts Elec | TYPE-C-31-M-12 | USBC1 |
| 1 | RED | LED_0805_2012Metric | D1 |
| 1 | YELLOW | LED_0805_2012Metric | D2 |
| 1 | 2.2UH 2.2uH | L_0603_1608Metric | L1 |
| 4 | 10UF 10uF | C_0402_1005Metric | C1, C7, C10, C11 |
| 6 | 0.1UF 0.1uF | C_0402_1005Metric | C2, C3, C4, C6, C8, C9 |
| 1 | 33UF 33uF | C_0805_2012Metric | C5 |
| 1 | 10NF 10nF | C_0402_1005Metric | C12 |
| 2 | 1k | R_0402_1005Metric | R4, R5 |
| 1 | 2k | R_0402_1005Metric | R6 |
| 1 | 50K 50k | R_0603_1608Metric | R7 |
| 2 | 100K 100k | R_0402_1005Metric | R8, R10 |
| 1 | 10K 10k | R_0402_1005Metric | R9 |
| 1 | 330 | R_0402_1005Metric | R11 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2.2K 2.2k | R_0402_1005Metric | R12 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R13, R14 |
| 1 | 1M | R_0402_1005Metric | R15 |
ESP32-Lipo-Powersupply design files
The KiCad project lives in the pierretek/ESP32-Lipo-Powersupply repository on GitHub; these links point at the commit this page was built from.
ESP32-Lipo-Powersupply: common questions
How big is the ESP32-Lipo-Powersupply PCB?
The ESP32-Lipo-Powersupply measures 29.7 × 47.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32-Lipo-Powersupply?
35 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32-Lipo-Powersupply design files?
From the pierretek/ESP32-Lipo-Powersupply repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32-Lipo-Powersupply design in my own project?
The repository has no license, so all rights stay with pierretek. Use it as a reference, and ask the author before reusing the design.
Similar boards
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k