Main
pioupiou-archive·pioupiou-v1-electronics·v1.1/main.kicad_pcb
About the Main PCB
Main is an open source PCB design by pioupiou-archive, published on GitHub. It is a 2-layer board measuring 76 × 29 mm, with 37 components from 25 distinct parts.
By type, the board carries 12 capacitors, 7 connectors, 7 resistors, 1 battery holder, 1 relay and 1 switch.
It belongs with the sensors designs in this gallery.
From the project
This repository contains the electronic parts of the Pioupiou V1 wind sensor.
This repository contains the electronic parts of the Pioupiou V1 wind sensor.
PLEASE MOVE TO THE NEW PROJECT: https://github.com/windbird-sensor/windbird-electronics
Copyright (c) 2021 OpenWindMap SCIC SA and contributors
Permission is granted to anyone to use this Material for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:

Main bill of materials (BOM)
37 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | A-1JB CONN_2 | UFL | P1 |
| 6 | CONN_1 | PIN_ARRAY_1 | P3, P4, P5, P6, P7, P8 |
| 1 | AAA | VIS_BATTERIE | BT1 |
| 1 | HMC5883L | HMC5883L | HMC1 |
| 1 | CONN_3 | Socket_Strip_Straight_1x03 | K1 |
| 1 | VAL** | MIRE-1MM | MIRE-1MM |
| 1 | NCP4681 | NCP4681 | NCP1 |
| 1 | L80 | PA6H | QL1 |
| 1 | SI1865DL | si1865dl | SI1 |
| 1 | 1571300 SW_PUSH | 1571300 | SW1 |
| 1 | TD1208 | TD1208 | TD1 |
| 1 | LED-3MM | LED-3MM | LED1 |
| 1 | ESD9R3.3ST5G | sod923 | D1 |
| 1 | 10uF/6V3 | SM1206POL | C3 |
| 4 | 100n | SM0603_Capa | C7, C10, C12, C16 |
| 1 | 10nF | SM0603_Capa | C8 |
| 2 | vide | SM0603_Capa | C9, C17 |
| 1 | 10u | SM1206POL | C11 |
| 1 | 220nF | SM0603_Capa | C13 |
| 1 | 4.7uF | SM0603_Capa | C14 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100nF | SM0603_Capa | C15 |
| 4 | 10K | SM0603_Resistor | R1, R2, R4, R8 |
| 1 | 1M | SM0603_Resistor | R3 |
| 1 | 0R | SM0603_Resistor | R5 |
| 1 | 68R R_0603 | R_0603 | R6 |
Main design files
The KiCad project lives in the pioupiou-archive/pioupiou-v1-electronics repository on GitHub; these links point at the commit this page was built from.
- Layoutv1.1/main.kicad_pcb
- BOMv1.0/BOM.md
Main: common questions
How big is the Main PCB?
The Main measures 76 × 29 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Main?
37 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Main design files?
From the pioupiou-archive/pioupiou-v1-electronics repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Main design in my own project?
The repository has no license, so all rights stay with pioupiou-archive. Use it as a reference, and ask the author before reusing the design.
More boards in pioupiou-v1-electronics
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956