TaskTracker
Pips801·TaskTracker
About the TaskTracker PCB
TaskTracker is an open source ESP32 PCB design by Pips801, published on GitHub. It is a 2-layer board measuring 92 × 150 mm, with 20 components from 5 distinct parts.
Its main chip is the XIAO-ESP32-C3-DIP, from the ESP32 family. By type, the board carries 6 switches, 6 diodes, 6 capacitors, 1 IC and 1 connector.
From the project
Reminder Tracker
Main components on the TaskTracker
TaskTracker bill of materials (BOM)
20 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-DIP | XIAO-ESP32-C3-DIP | U1 |
| 1 | External RTC | PinHeader_1x05_P2.54mm_Vertical | J1 |
| 6 | SW_Push | SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5, SW6 |
| 6 | WS2812B | LED_WS2812B-Mini_PLCC4_3.5x3.5mm | D1, D2, D3, D4, D5, D6 |
| 6 | 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C3, C4, C5, C6, C7 |
TaskTracker design files
The KiCad project lives in the Pips801/TaskTracker repository on GitHub; these links point at the commit this page was built from.
- LayoutReminderTracker.kicad_pcb
- SchematicReminderTracker.kicad_sch
TaskTracker: common questions
What microcontroller does the TaskTracker use?
The TaskTracker is built around the XIAO-ESP32-C3-DIP, from the ESP32 family.
How big is the TaskTracker PCB?
The TaskTracker measures 92 × 150 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TaskTracker?
20 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the TaskTracker design files?
From the Pips801/TaskTracker repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the TaskTracker design in my own project?
The repository has no license, so all rights stay with Pips801. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TaskTracker without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k