40 open source boards using the XIAO-ESP32-C3-DIP

Real designs built with the XIAO-ESP32-C3-DIP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

40 boardsClear filters|Most starred

How designs wire the XIAO-ESP32-C3-DIP

Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the XIAO-ESP32-C3-DIP connects to, and the resistors, capacitors and other passives placed on it.

GND_13pin 13Connected to: GND 94%

13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BluetoothPedal Main by skngh, BadgePCB by Pegoku, WLED-BOX by Choccy-vr and EndevourDMX by Darbyshire64.

The XIAO-ESP32-C3-DIP in open source designs

The gallery holds 40 open source boards using the XIAO-ESP32-C3-DIP from 36 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 21 components.

89% are two-layer designs, the rest use four layers or more, and 35% carry an open source license.

The most starred is XIAO by Josephrp.

Microcontrollers on boards using the XIAO-ESP32-C3-DIP

XIAO-ESP32-C3-DIP: common questions

Where can I find a XIAO-ESP32-C3-DIP reference design?

Each of the 40 boards on this page is a real design using the XIAO-ESP32-C3-DIP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the XIAO-ESP32-C3-DIP?

The XIAO-ESP32-C3-SMD, XIAO-ESP32-C5-SMD, XIAO-ESP32-C6-DIP, XIAO-ESP32-C6-SMD and XIAO-ESP32-S3-DIP appear in the most repositories here.

Which microcontrollers do boards using the XIAO-ESP32-C3-DIP use?

Most are built on ESP32 (25), RP2040/RP2350 (14) and Nordic nRF (1).

How big is a typical board using the XIAO-ESP32-C3-DIP?

The median is 100 × 100 mm, and 89% are two-layer designs.

What is the most popular open source board using the XIAO-ESP32-C3-DIP?

By GitHub stars, XIAO by Josephrp, with 12 stars.

Can I simulate one of these boards using the XIAO-ESP32-C3-DIP before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part