HardLabs

PiDeck

piraticus·piDeck·electronics/pideck/pideck.kicad_pcb

PiDeck PCB layout, top view — open source RP2040/RP2350 board by piraticus

About the PiDeck PCB

PiDeck is an open source RP2040/RP2350 PCB design by piraticus, published on GitHub. It is a 2-layer board measuring 1.5 × 1.5 mm, with 43 components from 21 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the AP7312-1828W6-7, GD25Q16ETIGR, RT9742GGJ5, TXS0108EPW and RT9742SNGV. By type, the board carries 23 capacitors, 7 resistors, 6 ICs, 4 connectors, 1 crystal and 1 battery holder.

Main components on the PiDeck

RP2040AP7312-1828W6-7GD25Q16ETIGRRT9742GGJ5TXS0108EPWRT9742SNGV

PiDeck bill of materials (BOM)

43 components, 21 distinct parts.

QtyPartRefs
1
RP2040
U1
1
AP7312-1828W6-7
U2
1
GD25Q16ETIGR
U3
1
RT9742GGJ5
U4
1
TXS0108EPW
U5
1
RT9742SNGV
U6
1
ABM8-272-T3
X1
1
BM20B_0.8_-34DS-0.4V_53_
J1
1
ARJM11D7-502-AB-EW2
J2
1
HDMI_D_1.4
J3
1
Micro_SD_Card_Det2
J4
1
BAT-HLD-001-THM
BT1
1
ComputeModule5-CM5
Module1
7
1uF
C1, C2, C3, C6, C15, C18, C19
13
100nF
C4, C5, C7, C8, C9, C10, C11, C12 +5
2
15pF
C16, C17
1
10uF
C21
2
10K
R1, R3
1
1k
R2
2
27.4k
R4, R5
Show 1 more
QtyPartRefs
2
470
R6, R7

PiDeck design files

The KiCad project lives in the piraticus/piDeck repository on GitHub; these links point at the commit this page was built from.

PiDeck: common questions

What microcontroller does the PiDeck use?

The PiDeck is built around the RP2040, from the RP2040/RP2350 family.

How big is the PiDeck PCB?

The PiDeck measures 1.5 × 1.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PiDeck?

43 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the PiDeck design files?

From the piraticus/piDeck repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the PiDeck design in my own project?

The repository has no license, so all rights stay with piraticus. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PiDeck without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards