48 open source boards using the RT9742SNGV

Real designs built with the RT9742SNGV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

48 boardsClear filters|Most starred

How designs wire the RT9742SNGV

Read from the KiCad layouts of 37 open source designs, one per repository: what each pin of the RT9742SNGV connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT pin has a capacitor to GND on 36 of 37 designs, most often 100 nF (then 1 µF).
  • The IN pin is tied to 5V on 36 of 37 designs.
INpin 1Connected to: 5V 97%
OUTpin 2Connected to: A connector 86%
  • Capacitor to GND on 97% · 100 nF (37), 1 µF (1)
GNDpin 3Connected to: GND 97%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Rpi cm5io mini itx by sanctuary-systems-com, Libreboard by 256foundation, BB3plus test mainboard by eez-open and BedCooler by NicholasKorth.

The RT9742SNGV in open source designs

The gallery holds 48 open source boards using the RT9742SNGV from 37 GitHub repositories; a typical one measures about 160 × 90 mm and carries around 137 components.

92% use four copper layers or more, and 42% carry an open source license.

The most starred is Rpi cm5io mini itx by sanctuary-systems-com.

Microcontrollers on boards using the RT9742SNGV

RT9742SNGV: common questions

Where can I find a RT9742SNGV reference design?

Each of the 48 boards on this page is a real design using the RT9742SNGV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the RT9742SNGV OUT pin connected?

The OUT pin has a capacitor to GND on 36 of 37 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 37 open source designs using the RT9742SNGV.

How is the RT9742SNGV IN pin connected?

The IN pin is tied to 5V on 36 of 37 designs. Counted from the KiCad layouts of 37 open source designs using the RT9742SNGV.

What parts are used alongside the RT9742SNGV?

The RT9742GGJ5, TPD4EUSB30, AP22653W6, MagJack-A70-112-331N126 and 74LVC1G07SE-7 appear in the most repositories here.

Which microcontrollers do boards using the RT9742SNGV use?

Most are built on Raspberry Pi (34), ESP32 (4), RP2040/RP2350 (3) and STM32 (3).

How big is a typical board using the RT9742SNGV?

The median is 160 × 90 mm, and 8% are two-layer designs.

What is the most popular open source board using the RT9742SNGV?

By GitHub stars, Rpi cm5io mini itx by sanctuary-systems-com, with 28 stars.

Can I simulate one of these boards using the RT9742SNGV before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part