Piscsi
PiSCSI·piscsi-hw·piscsi_2p7/piscsi.kicad_pcb
About the Piscsi PCB
Piscsi is an open source Raspberry Pi PCB design by PiSCSI, published on GitHub under the BSD-3-Clause license. It is a 2-layer board measuring 65 × 56 mm, with 81 components from 19 distinct parts.
Its main chip is the C50982, from the Raspberry Pi family. Other key parts include the SN74LS641-1DW. By type, the board carries 58 resistors, 8 connectors, 5 diodes, 4 ICs, 4 capacitors and 1 switch.
From the project
Hardware Repository for PiSCSI
Main components on the Piscsi
Piscsi bill of materials (BOM)
81 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | SN74LS641-1DW | SOIC127P1030X265-20N | IC1, IC2, IC3, IC4 |
| 1 | C50982 Raspberry_Pi_2_3 | PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | DNP | PinHeader_1x02_P2.54mm_Horizontal | J2 |
| 1 | C30006 Conn_02x25_Odd_Even | PinHeader_2x25_P2.54mm_Vertical | J3 |
| 1 | C40877 I2C Pinout | PinSocket_1x06_P2.54mm_Vertical | J4 |
| 1 | DNP | PinHeader_2x03_P2.54mm_Vertical | J5 |
| 1 | L717SDB25PA4CH4F CONNFLY DB-25 | L717SDB25PA4CH4F_Flipped | J6 |
| 1 | U254-051N-4BH806 USB_B_Micro | U254051N4BH806 | J8 |
| 1 | 171826-4 | PinHeader_1x04_P2.54mm_Vertical | J20 |
| 1 | 12B1100B 1A | Fuse_1206_3216Metric | FUSE1 |
| 1 | DSHP02TSGET Switch x2 | SOIC127P812X230-4N | S1 |
| 4 | C2297 Green | LED_0805_2012Metric | D1, D2, D3, D4 |
| 1 | SM4007PL | D_SOD-123F | D5 |
| 4 | 10UF 10uF | C_0402_1005Metric | C1, C2, C3, C4 |
| 3 | 0402WGF2001TCE 2k | R_0402_1005Metric | R1, R2, R4 |
| 1 | 0402WGF5101TCE 5.1k | R_0402_1005Metric | R3 |
| 18 | 0402WGF1002TCE 10k | R_0402_1005Metric | R5, R6, R7, R8, R9, R10, R11, R12 +10 |
| 18 | 0805W8F2200T5E 220 | R_0805_2012Metric | R23, R24, R25, R26, R27, R28, R29, R30 +10 |
| 18 | 0805W8F3300T5E 330 | R_0805_2012Metric | R41, R42, R43, R44, R45, R46, R47, R48 +10 |
Piscsi design files
The KiCad project lives in the PiSCSI/piscsi-hw repository on GitHub; these links point at the commit this page was built from.
Piscsi: common questions
What microcontroller does the Piscsi use?
The Piscsi is built around the C50982, from the Raspberry Pi family.
How big is the Piscsi PCB?
The Piscsi measures 65 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Piscsi?
81 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Piscsi design files?
From the PiSCSI/piscsi-hw repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Piscsi design in my own project?
Yes, under the terms of its BSD-3-Clause license, which PiSCSI chose for the repository.
Can I test firmware for the Piscsi without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
More boards in piscsi-hw
Raspberry Pi
Rascsi 2p5
PiSCSI
65 × 56 mm86 parts2LBSD-3-Clause27Raspberry Pi
Rascsi 2p4
PiSCSI
65 × 56 mm86 partsBSD-3-Clause27Raspberry Pi
Rascsi 2p6
PiSCSI
65 × 56 mm84 parts2LBSD-3-Clause27Raspberry Pi
Rascsi 2p3
PiSCSI
65 × 56 mm83 partsBSD-3-Clause27Raspberry Pi
Rascsi 2p2
PiSCSI
65 × 56 mm82 partsBSD-3-Clause27Raspberry Pi
Rascsi zero
PiSCSI
65 × 30 mm76 parts2LBSD-3-Clause27Raspberry Pi
Rascsi din
PiSCSI
65 × 73.7 mm31 partsBSD-3-Clause27Ctrl board
PiSCSI
65 × 34 mm27 parts2LBSD-3-Clause27Loopback tester
PiSCSI
64.5 × 29.9 mm6 partsBSD-3-Clause27Daisy chain board
PiSCSI
65 × 21.2 mm4 parts2LBSD-3-Clause27
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507