Rascsi din
PiSCSI·piscsi-hw·rascsi_1p6/rascsi_din.kicad_pcb
About the Rascsi din PCB
Rascsi din is an open source Raspberry Pi PCB design by PiSCSI, published on GitHub under the BSD-3-Clause license. It is a board measuring 65 × 73.7 mm, with 31 components from 20 distinct parts.
Its main chip is the RASPBERRY_PI_2_3, from the Raspberry Pi family. Other key parts include the SN74LS641-1C. By type, the board carries 10 resistors, 5 diodes, 5 inductors, 4 ICs, 4 connectors and 2 jumpers.
From the project
Hardware Repository for PiSCSI
Main components on the Rascsi din
Rascsi din bill of materials (BOM)
31 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | SN74LS641-1C | SOIC20S | U1, U2, U3, U4 |
| 1 | RASPBERRY_PI_2_3 Raspberry_Pi_2_3 | PinHeader_2x20_P2.54mm_Vertical | J1 |
| 1 | DLS3XS6AK44X | DLS3XS6AK44X | J2 |
| 1 | CONN_02X25_ODD_EVEN Conn_02x25_Odd_Even | PinHeader_2x25_P2.54mm_Vertical_SMD | J3 |
| 1 | I2C Pinout | PinSocket_1x05_P2.54mm_Vertical | J4 |
| 1 | R-US_0204_7 | 0204_7 | FUSE1A1 |
| 1 | Term_Enable_GND | PinSocket_1x02_P2.54mm_Vertical | JP1 |
| 1 | TERM_ENABLE_5V Term_Enable_5v | PinSocket_1x02_P2.54mm_Vertical | JP2 |
| 1 | 1N4004 | DO41-10 | D1 |
| 4 | LED_Small | LED_0805_2012Metric | D2, D3, D4, D5 |
| 1 | Mac | mac_happy_small | L1 |
| 1 | Dogcow | dogcow | L2 |
| 1 | MAC2 Mac2 | mac_happy_small | L3 |
| 1 | DOGCOW2 Dogcow2 | dogcow | L4 |
| 1 | Mac Trashcan | mac_trashcan | L6 |
| 3 | 44 | R_0805_2012Metric | R1, R2, R4 |
| 1 | 112 | R_0805_2012Metric | R3 |
| 2 | 10K 10k | R_Array_SIP10 | RN1, RN2 |
| 2 | 220 | R_Array_SIP10 | RN3, RN5 |
| 2 | 330 | R_Array_SIP10 | RN4, RN6 |
Rascsi din design files
The KiCad project lives in the PiSCSI/piscsi-hw repository on GitHub; these links point at the commit this page was built from.
Rascsi din: common questions
What microcontroller does the Rascsi din use?
The Rascsi din is built around the RASPBERRY_PI_2_3, from the Raspberry Pi family.
How big is the Rascsi din PCB?
The Rascsi din measures 65 × 73.7 mm and is 1.6 mm thick.
How many components are on the Rascsi din?
31 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Rascsi din design files?
From the PiSCSI/piscsi-hw repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Rascsi din design in my own project?
Yes, under the terms of its BSD-3-Clause license, which PiSCSI chose for the repository.
Can I test firmware for the Rascsi din without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
More boards in piscsi-hw
Raspberry Pi
Rascsi 2p5
PiSCSI
65 × 56 mm86 parts2LBSD-3-Clause27Raspberry Pi
Rascsi 2p4
PiSCSI
65 × 56 mm86 partsBSD-3-Clause27Raspberry Pi
Rascsi 2p6
PiSCSI
65 × 56 mm84 parts2LBSD-3-Clause27Raspberry Pi
Rascsi 2p3
PiSCSI
65 × 56 mm83 partsBSD-3-Clause27Raspberry Pi
Rascsi 2p2
PiSCSI
65 × 56 mm82 partsBSD-3-Clause27Raspberry Pi
Piscsi
PiSCSI
65 × 56 mm81 parts2LBSD-3-Clause27Raspberry Pi
Rascsi zero
PiSCSI
65 × 30 mm76 parts2LBSD-3-Clause27Ctrl board
PiSCSI
65 × 34 mm27 parts2LBSD-3-Clause27Loopback tester
PiSCSI
64.5 × 29.9 mm6 partsBSD-3-Clause27Daisy chain board
PiSCSI
65 × 21.2 mm4 parts2LBSD-3-Clause27
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507