Rascsi 2p3
PiSCSI·piscsi-hw·rascsi_2p3/rascsi_2p3.kicad_pcb
About the Rascsi 2p3 PCB
Rascsi 2p3 is an open source Raspberry Pi PCB design by PiSCSI, published on GitHub under the BSD-3-Clause license. It is a board measuring 65 × 56 mm, with 83 components from 20 distinct parts.
Its main chip is the C50982, from the Raspberry Pi family. Other key parts include the SN74LS641-1DW. By type, the board carries 58 resistors, 8 connectors, 6 crystals, 5 diodes, 4 ICs and 1 switch.
From the project
Hardware Repository for PiSCSI
Main components on the Rascsi 2p3
Rascsi 2p3 bill of materials (BOM)
83 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | SN74LS641-1DW | SOIC127P1030X265-20N | IC1, IC2, IC3, IC4 |
| 2 | Mac | mac_happy_small | X1, X3 |
| 4 | Dogcow | dogcow | X2, X4, X5, X6 |
| 1 | C50982 Raspberry_Pi_2_3 | PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | DNP | PinHeader_1x02_P2.54mm_Horizontal | J2 |
| 1 | C30006 Conn_02x25_Odd_Even | PinHeader_2x25_P2.54mm_Vertical | J3 |
| 1 | C50950 I2C Pinout | PinSocket_1x05_P2.54mm_Vertical | J4 |
| 1 | DNP | PinHeader_2x03_P2.54mm_Vertical | J5 |
| 1 | DS1037-25FNAKT74-0CC CONNFLY DB-25 | 57489011 | J6 |
| 1 | DNP | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | U254-051N-4BH806 USB_B_Micro | U254051N4BH806 | J8 |
| 1 | 12B1100B 1A | Fuse_1206_3216Metric | FUSE1 |
| 1 | DSHP02TSGET Switch x2 | SOIC127P812X230-4N | S1 |
| 4 | C2297 Green | LED_0805_2012Metric | D1, D2, D3, D4 |
| 1 | SM4007PL | D_SOD-123F | D5 |
| 3 | 0402WGF2001TCE 2k | R_0402_1005Metric | R1, R2, R4 |
| 1 | 0402WGF5101TCE 5.1k | R_0402_1005Metric | R3 |
| 18 | 0402WGF1002TCE 10k | R_0402_1005Metric | R5, R6, R7, R8, R9, R10, R11, R12 +10 |
| 18 | 0402WGF2200TCE 220 | R_0402_1005Metric | R23, R24, R25, R26, R27, R28, R29, R30 +10 |
| 18 | 0402WGF3300TCE 330 | R_0402_1005Metric | R41, R42, R43, R44, R45, R46, R47, R48 +10 |
Rascsi 2p3 design files
The KiCad project lives in the PiSCSI/piscsi-hw repository on GitHub; these links point at the commit this page was built from.
Rascsi 2p3: common questions
What microcontroller does the Rascsi 2p3 use?
The Rascsi 2p3 is built around the C50982, from the Raspberry Pi family.
How big is the Rascsi 2p3 PCB?
The Rascsi 2p3 measures 65 × 56 mm and is 1.6 mm thick.
How many components are on the Rascsi 2p3?
83 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Rascsi 2p3 design files?
From the PiSCSI/piscsi-hw repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Rascsi 2p3 design in my own project?
Yes, under the terms of its BSD-3-Clause license, which PiSCSI chose for the repository.
Can I test firmware for the Rascsi 2p3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
More boards in piscsi-hw
Raspberry Pi
Rascsi 2p5
PiSCSI
65 × 56 mm86 parts2LBSD-3-Clause27Raspberry Pi
Rascsi 2p4
PiSCSI
65 × 56 mm86 partsBSD-3-Clause27Raspberry Pi
Rascsi 2p6
PiSCSI
65 × 56 mm84 parts2LBSD-3-Clause27Raspberry Pi
Rascsi 2p2
PiSCSI
65 × 56 mm82 partsBSD-3-Clause27Raspberry Pi
Piscsi
PiSCSI
65 × 56 mm81 parts2LBSD-3-Clause27Raspberry Pi
Rascsi zero
PiSCSI
65 × 30 mm76 parts2LBSD-3-Clause27Raspberry Pi
Rascsi din
PiSCSI
65 × 73.7 mm31 partsBSD-3-Clause27Ctrl board
PiSCSI
65 × 34 mm27 parts2LBSD-3-Clause27Loopback tester
PiSCSI
64.5 × 29.9 mm6 partsBSD-3-Clause27Daisy chain board
PiSCSI
65 × 21.2 mm4 parts2LBSD-3-Clause27
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507