G431-Board
Pledoge·G431-Board
About the G431-Board
G431-Board is an open source STM32 PCB design by Pledoge, published on GitHub. It is a 2-layer board measuring 77 × 44 mm, with 102 components from 46 distinct parts.
Its main chip is the STM32G431CBUX, from the STM32 family. Other key parts include the RS3236, RY8411, CH340N and TJA1042T-3. By type, the board carries 31 resistors, 28 capacitors, 18 connectors, 13 diodes, 5 ICs and 3 fuses.
Main components on the G431-Board
G431-Board bill of materials (BOM)
102 components, 46 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32G431CBUX STM32G431CBUx | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | RS3236 | SOT-23-5 | U2 |
| 1 | RY8411 | SOT-23-6 | U3 |
| 1 | CH340N | SOP-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | TJA1042T-3 | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | 25MHZ_3225 25Mhz_3225 | Crystal_SMD_SeikoEpson_FA238V-4Pin_3.2x2.5mm | Y1 |
| 8 | Servo | PinHeader_1x03_P2.54mm_Vertical | J1, J2, J3, J4, J5, J8, J17, J18 |
| 2 | BARREL_JACK_SWITCH_PIN3RING Barrel_Jack_Switch_Pin3Ring | BarrelJack_GCT_DCJ200-10-A_Horizontal | J6, J15 |
| 1 | PWROut | AMASS_XT30U-F_1x02_P5.0mm_Vertical | J7 |
| 1 | SWD | Molex_PicoBlade_53261-0471_1x04-1MP_P1.25mm_Horizontal | J9 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_Palconn_UTC16-G | J10 |
| 2 | CONN_01X04_MOUNTINGPIN Conn_01x04_MountingPin | JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_Vertical | J11, J13 |
| 1 | CONN_01X04_MOUNTINGPIN Conn_01x04_MountingPin | PinHeader_1x04_P2.54mm_Vertical | J12 |
| 1 | CAN1 | JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_Vertical | J14 |
| 1 | CONN_01X07_PIN Conn_01x07_Pin | PinSocket_1x07_P2.54mm_Vertical | J19 |
| 2 | Fuse | Fuse_Littelfuse-NANO2-451_453 | F1, F3 |
| 1 | 1A 1206 | Fuse_1206_3216Metric | F2 |
| 1 | BTN1 | SW_SPST_TL3342 | SW1 |
| 1 | BTN0 | SW_SPST_TL3342 | SW2 |
| 1 | SMA5V0A | D_SMA | D1 |
Show 26 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SS54 | D_SMA | D2 |
| 3 | LED | LED_0603_1608Metric | D3, D4, D5 |
| 2 | SMCJ28A | D_SMC | D6, D13 |
| 1 | SMF3V3A | D_SMF | D7 |
| 1 | SMF5V0A | D_SMF | D8 |
| 1 | K34 | D_SMF | D9 |
| 2 | LED_Blue | LED_0603_1608Metric | D10, D11 |
| 1 | SMF5.0A | D_SMF | D12 |
| 1 | 6U8 6u8 | L_Sunlord_MWSA0402S | L1 |
| 5 | 10U 10u | C_1206_3216Metric | C1, C2, C12, C28, C29 |
| 3 | 10U 10u | C_0603_1608Metric | C3, C6, C18 |
| 1 | 10N 10n | C_0603_1608Metric | C4 |
| 11 | 100N 100n | C_0603_1608Metric | C5, C8, C11, C13, C14, C15, C16, C20 +3 |
| 3 | 20P 20p | C_0603_1608Metric | C7, C9, C10 |
| 2 | 10UF 10uF | C_1206_3216Metric | C17, C21 |
| 1 | 100NF 100nF | C_0603_1608Metric | C19 |
| 2 | 100U 100u | C_1206_3216Metric | C30, C31 |
| 1 | 54K6 54k6 | R_0603_1608Metric | R1 |
| 15 | 120R | R_0603_1608Metric | R2, R4, R5, R10, R12, R14, R15, R16 +7 |
| 5 | 10K 10k | R_0603_1608Metric | R3, R6, R13, R28, R29 |
| 1 | 240K 240k | R_0603_1608Metric | R7 |
| 1 | 3K3 3k3 | R_0603_1608Metric | R8 |
| 3 | 2K2 2k2 | R_0603_1608Metric | R9, R32, R33 |
| 1 | 1m | R_0603_1608Metric | R17 |
| 2 | 33R | R_0603_1608Metric | R18, R19 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R20, R21 |
G431-Board design files
The KiCad project lives in the Pledoge/G431-Board repository on GitHub; these links point at the commit this page was built from.
- Layoutre-G431.kicad_pcb
- Schematicre-G431.kicad_sch
- BOMproduction/bom.csv
G431-Board: common questions
What microcontroller does the G431-Board use?
The G431-Board is built around the STM32G431CBUX, from the STM32 family.
How big is the G431-Board?
The G431-Board measures 77 × 44 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the G431-Board?
102 components, from 46 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the G431-Board design files?
From the Pledoge/G431-Board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the G431-Board design in my own project?
The repository has no license, so all rights stay with Pledoge. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the G431-Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k