11 open source boards using the RS3236
Real designs built with the RS3236, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
SuperCap2024Control V1.1R F3 ISOPWR
hkustenterprize
40.5 × 59.5 mm141 parts4LGPL-3.070STM32
WirelessCharger V0.1
hkustenterprize
64 × 64 mm187 parts4LGPL-3.020STM32
SuperCap2024Control V1.1R F3 ISOPWR
GKD-RM-Lab
40.5 × 59.5 mm141 parts4LGPL-3.05STM32
SuperCap2024Control V1.1R F3 ISOPWR
evil0knight
40.5 × 59.5 mm141 parts4LNo license5STM32
FOC Control Boards
coopjz
81 × 80.9 mm106 parts4LMIT1STM32
Underwater-Communication
Frrrrrrrrrank
80 × 80 mm211 parts4LNo license0STM32
G431-Board
Pledoge
77 × 44 mm102 parts2LNo license0RM2026-USB-to-UART
baoqi-zhong
26.6 × 18.4 mm25 parts2LNo license0STM32
PowerControl PCM V0.1 Control
hkustenterprize
44 × 60 mm146 parts4LGPL-3.020STM32
SuperCapPowerBoard G431 Lite V1
evil0knight
60 × 40 mm124 parts4LNo license5STM32
CapArray JYC RM2023 V0.2
evil0knight
59 × 90 mm114 parts4LNo license5
How designs wire the RS3236
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the RS3236 connects to, and the resistors, capacitors and other passives placed on it.
- The BP pin has a capacitor to GND on 7 of 8 designs, most often 10 nF.
- The IN pin is tied to 5V on 7 of 8 designs.
- The EN pin is tied to 5V on 7 of 8 designs.
- The OUT pin is tied to 3.3V on 7 of 8 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: 5V 88% | — |
| GNDpin 2 | Connected to: GND 88% | — |
| ENpin 3 | Connected to: 5V 88% | — |
| BPpin 4 | Connected to: Signal 100% |
|
| OUTpin 5 | Connected to: 3.3V 88% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SuperCap2024Control V1.1R F3 ISOPWR by hkustenterprize, PowerControl PCM V0.1 Control by hkustenterprize, CapArray JYC RM2023 V0.2 by evil0knight and SuperCap2024Control V1.1R F3 ISOPWR by GKD-RM-Lab.
The RS3236 in open source designs
The gallery holds 11 open source boards using the RS3236 from 8 GitHub repositories; a typical one measures about 59 × 59.5 mm and carries around 141 components.
82% use four copper layers or more, and 45% carry an open source license.
The most starred is SuperCap2024Control V1.1R F3 ISOPWR by hkustenterprize.
Parts used alongside the RS3236
Microcontrollers on boards using the RS3236
What boards using the RS3236 are built for
RS3236: common questions
Where can I find a RS3236 reference design?
Each of the 11 boards on this page is a real design using the RS3236. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the RS3236 BP pin connected?
The BP pin has a capacitor to GND on 7 of 8 designs, most often 10 nF. Counted from the KiCad layouts of 8 open source designs using the RS3236.
How is the RS3236 IN pin connected?
The IN pin is tied to 5V on 7 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the RS3236.
How is the RS3236 EN pin connected?
The EN pin is tied to 5V on 7 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the RS3236.
What parts are used alongside the RS3236?
The RY8411, INA240A1PW, ISO_DC, GS8332-SR and SIT1042/3 appear in the most repositories here.
Which microcontrollers do boards using the RS3236 use?
Most are built on STM32 (10).
How big is a typical board using the RS3236?
The median is 59 × 59.5 mm, and 18% are two-layer designs.
What is the most popular open source board using the RS3236?
By GitHub stars, SuperCap2024Control V1.1R F3 ISOPWR by hkustenterprize, with 70 stars.
Can I simulate one of these boards using the RS3236 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.