11 open source boards using the RY8411

Real designs built with the RY8411, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the RY8411

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the RY8411 connects to, and the resistors, capacitors and other passives placed on it.

  • The BS pin has a series capacitor on 8 of 8 designs, most often 100 nF.
  • The FB pin has a resistor to GND on 7 of 8 designs, most often 10 kΩ (then 100 kΩ).
  • The EN pin has a capacitor to GND on 7 of 8 designs, most often 10 µF (then 100 nF).
  • The IN pin has a capacitor to GND on 7 of 8 designs, most often 10 µF (then 100 nF).
BSpin 1Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (7)
GNDpin 2Connected to: GND 88%
FBpin 3Connected to: Signal 100%
  • Resistor to GND on 88% · 10 kΩ (6), 100 kΩ (2)
  • Pull-up to 5V on 75% · 118 kΩ (3), 54.6 kΩ (2), 53.6 kΩ (1)
  • Capacitor to the supply on 75% · 20 pF (4), 100 pF (2)
ENpin 4Connected to: RY8411 38% · 24V 38%
  • Capacitor to GND on 88% · 10 µF (14), 100 nF (5)
INpin 5Connected to: RY8411 38% · 24V 38%
  • Capacitor to GND on 88% · 10 µF (14), 100 nF (5)
LXpin 6Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (7)
  • Inductor on 100% · 4.7 µH (4), 6.8 µH (3)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SuperCap2024Control V1.1R F3 ISOPWR by hkustenterprize, PowerControl PCM V0.1 Control by hkustenterprize, CapArray JYC RM2023 V0.2 by evil0knight and SuperCap2024Control V1.1R F3 ISOPWR by GKD-RM-Lab.

The RY8411 in open source designs

The gallery holds 11 open source boards using the RY8411 from 8 GitHub repositories; a typical one measures about 60 × 59.5 mm and carries around 141 components.

91% use four copper layers or more, and 45% carry an open source license.

The most starred is SuperCap2024Control V1.1R F3 ISOPWR by hkustenterprize.

Microcontrollers on boards using the RY8411

What boards using the RY8411 are built for

RY8411: common questions

Where can I find a RY8411 reference design?

Each of the 11 boards on this page is a real design using the RY8411. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the RY8411 BS pin connected?

The BS pin has a series capacitor on 8 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the RY8411.

What resistor goes on the RY8411 FB pin?

The FB pin has a resistor to GND on 7 of 8 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 8 open source designs using the RY8411.

How is the RY8411 EN pin connected?

The EN pin has a capacitor to GND on 7 of 8 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the RY8411.

What parts are used alongside the RY8411?

The RS3236, INA240A1PW, ISO_DC, GS8332-SR and SIT1042/3 appear in the most repositories here.

Which microcontrollers do boards using the RY8411 use?

Most are built on STM32 (10) and ESP32 (1).

How big is a typical board using the RY8411?

The median is 60 × 59.5 mm, and 9% are two-layer designs.

What is the most popular open source board using the RY8411?

By GitHub stars, SuperCap2024Control V1.1R F3 ISOPWR by hkustenterprize, with 70 stars.

Can I simulate one of these boards using the RY8411 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part