HardLabs

ESP Racer 2025.kicad pcb imposition

plenprojectcompany·ESPRacer-webapp·circuit/ESP_Racer_2025/ESP_Racer_2025.kicad_pcb_imposition.kicad_pcb

ESP Racer 2025.kicad pcb imposition layout, top view — open source ESP32 board by plenprojectcompany
Simulate this board

About the ESP Racer 2025.kicad pcb imposition

ESP Racer 2025.kicad pcb imposition is an open source ESP32 PCB design by plenprojectcompany, published on GitHub under the MIT license. It is a 2-layer board measuring 20 × 35 mm, with 19 components from 16 distinct parts.

Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the XCL102D333CR-G, DRV8835DSST and SFV12R-2STE1LF. By type, the board carries 6 resistors, 5 capacitors, 4 ICs, 3 connectors and 1 diode.

From the project

ESPRacer for WebApp | PLEN Project Company Inc. ===============================================================================

Main components on the ESP Racer 2025.kicad pcb imposition

XCL102D333CR-GDRV8835DSSTSFV12R-2STE1LFESP32-C3-WROOM-02

ESP Racer 2025.kicad pcb imposition bill of materials (BOM)

19 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XCL102D333CR-G
IC1
1
DRV8835DSST
U1
1
SFV12R-2STE1LF
U2
1
ESP32-C3-WROOM-02
U3
1
CONN_LED_1
Conn_LED_1
J1
1
CONN_LED_2
Conn_LED_2
J2
1
Conn_Servo
J3
1
Status
D1
2
10U
10u
C1, C4
1
0.1U
0.1u
C2
1
10U
0.1u
C3
1
0.1U
0.1μF
C5
2
10K
10k
R1, R4
2
300
330
R2, R3
1
330
R5
1
20K
20k
R6

ESP Racer 2025.kicad pcb imposition design files

The KiCad project lives in the plenprojectcompany/ESPRacer-webapp repository on GitHub; these links point at the commit this page was built from.

ESP Racer 2025.kicad pcb imposition: common questions

What microcontroller does the ESP Racer 2025.kicad pcb imposition use?

The ESP Racer 2025.kicad pcb imposition is built around the ESP32-C3-WROOM-02, from the ESP32 family.

How big is the ESP Racer 2025.kicad pcb imposition?

The ESP Racer 2025.kicad pcb imposition measures 20 × 35 mm, has 2 copper layers and is 1 mm thick.

How many components are on the ESP Racer 2025.kicad pcb imposition?

19 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ESP Racer 2025.kicad pcb imposition design files?

From the plenprojectcompany/ESPRacer-webapp repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the ESP Racer 2025.kicad pcb imposition design in my own project?

Yes, under the terms of its MIT license, which plenprojectcompany chose for the repository.

Can I test firmware for the ESP Racer 2025.kicad pcb imposition without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in ESPRacer-webapp

Similar boards