Pletacka board
Pletacka-IoT·Pletacka-board·Pletacka-board-v2.0/hw/Pletacka-board.kicad_pcb
About the Pletacka board
Pletacka board is an open source ESP32 PCB design by Pletacka-IoT, published on GitHub under the MIT license. It is a 2-layer board measuring 32 × 76 mm, with 31 components from 24 distinct parts.
Its main chip is the ESP32-TTGO-T-Display, from the ESP32 family. Other key parts include the TPS54231D and EL357N(A)(TA)-G. By type, the board carries 9 resistors, 7 diodes, 6 capacitors, 3 ICs and 1 inductor.
It belongs with the iot & wireless and displays & leds designs in this gallery.
From the project
:pager: Electronic board for Pletacka-IoT project
Main components on the Pletacka board
Pletacka board bill of materials (BOM)
31 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS54231D | SOIC127P599X175-8N | U1 |
| 2 | EL357N(A)(TA)-G | SOP254P700X200-4N | U2, U3 |
| 1 | ESP32-TTGO-T-Display | ESP32-TTGO-T-Display | ESP1 |
| 1 | 24V 1A | R_1206_3216Metric | POLYFUSE1 |
| 1 | POWER_&_FINN_INPUT | TerminalBlock_Phoenix_PT-1,5-3-5.0-H_1x03_P5.00mm_Horizontal | POWER_&_FINN_INPUT1 |
| 1 | Pins | PinHeader_1x05_P2.54mm_Vertical | Pins1 |
| 1 | STOP_INPUT | TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | STOP_INPUT1 |
| 2 | SS34 | SMA | D1, D5 |
| 1 | 1SMB5935BT3G | DIOM5436X247N | D2 |
| 2 | LED | LED_0603_1608Metric | D3, D4 |
| 2 | B5819W | B5819W_SOD-123 | D6, D7 |
| 1 | L | SLW | L1 |
| 1 | 10u/50V | C_1206_3216Metric | C1 |
| 1 | 33n | C_0603_1608Metric | C2 |
| 1 | 22n | C_0603_1608Metric | C3 |
| 1 | 8.2n | C_0603_1608Metric | C4 |
| 1 | 100n | C_0603_1608Metric | C5 |
| 1 | 22u | C_0603_1608Metric | C6 |
| 2 | 2k2 | R_0603_1608Metric | R1, R2 |
| 1 | 100-OH | R_0603_1608Metric | R3 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4k7 | R_0603_1608Metric | R4 |
| 1 | 15k | R_0603_1608Metric | R5 |
| 2 | 20k | R_0603_1608Metric | R6, R7 |
| 2 | 10k | R_0603_1608Metric | R10, R11 |
Pletacka board design files
The KiCad project lives in the Pletacka-IoT/Pletacka-board repository on GitHub; these links point at the commit this page was built from.
Pletacka board: common questions
What microcontroller does the Pletacka board use?
The Pletacka board is built around the ESP32-TTGO-T-Display, from the ESP32 family.
How big is the Pletacka board?
The Pletacka board measures 32 × 76 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pletacka board?
31 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pletacka board design files?
From the Pletacka-IoT/Pletacka-board repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Pletacka board design in my own project?
Yes, under the terms of its MIT license, which Pletacka-IoT chose for the repository.
Can I test firmware for the Pletacka board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k