HardLabs

Ionto Current Source Core With Pour

Pluze·pcb·Designs/Ionto_Current_Source_Core/variants/Ionto_Current_Source_Core_With_Pour.kicad_pcb

Ionto Current Source Core With Pour PCB layout, top view — open source board by Pluze

About the Ionto Current Source Core With Pour PCB

Ionto Current Source Core With Pour is an open source PCB design by Pluze, published on GitHub under the MIT license. It is a 2-layer board measuring 27 × 20 mm, with 8 components from 8 distinct parts.

Other key parts include the R1218N041A-TR-FE. By type, the board carries 3 connectors, 2 capacitors, 1 IC, 1 inductor and 1 resistor.

It belongs with the power & battery designs in this gallery.

From the project

Reference and experimental KiCad PCB designs with reusable agent workflows

This project is a minimum verifiable implementation of the paper's R1218-based stimulation architecture. It accepts a protected 1-cell LiPo and provides one two-wire constant-current output. Charging, timing, wireless power, channel decoding, switches, and miniaturization are deliberately omitted.

This is an experimental electrical prototype, not a medically certified device. Do not connect it to a person until current limits, isolation, electrodes, open-load behavior, fault behavior, and applicable safety requirements have been reviewed by a qualified engineer.

Main components on the Ionto Current Source Core With Pour

R1218N041A-TR-FE

Ionto Current Source Core With Pour bill of materials (BOM)

8 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
R1218N041A-TR-FE
Nisshinbo
U1
1
BATTERY INPUT 3.0-4.2V
J1
1
STIM OUTPUT
J2
1
SNT-100-BK-T
CE JUMPER: 1=VIN 2=CE
Samtec
J3
1
SRN4018-220M
22uH
Bourns
L1
1
GRM21BR71A105KA01L
1uF 10V X7R
Murata
C1
1
C0805C224K5RACTU
220nF 50V X7R
KEMET
C2
1
RC0805FR-07536RL
RSET MODULE 536R (373uA)
Yageo
R1

Ionto Current Source Core With Pour design files

The KiCad project lives in the Pluze/pcb repository on GitHub; these links point at the commit this page was built from.

Ionto Current Source Core With Pour: common questions

How big is the Ionto Current Source Core With Pour PCB?

The Ionto Current Source Core With Pour measures 27 × 20 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ionto Current Source Core With Pour?

8 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ionto Current Source Core With Pour design files?

From the Pluze/pcb repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Ionto Current Source Core With Pour design in my own project?

Yes, under the terms of its MIT license, which Pluze chose for the repository.

More boards in pcb

Similar boards