Circuit de protection LiPo 5S
About the Circuit de protection LiPo 5S PCB
Circuit de protection LiPo 5S is an open source PCB design by Pokibot-org, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 73.7 × 43.2 mm, with 34 components from 25 distinct parts.
Other key parts include the LT1641-1. By type, the board carries 11 resistors, 6 capacitors, 5 diodes, 3 jumpers, 2 transistors and 2 connectors.
It belongs with the power & battery designs in this gallery.
Main components on the Circuit de protection LiPo 5S
Circuit de protection LiPo 5S bill of materials (BOM)
34 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LT1641-1 | SOIC-8_3.9x4.9mm_P1.27mm | U11 |
| 1 | FDD6637 | TO-252-2 | Q11 |
| 1 | STH80N10F7-2 | TO-263-2 | Q21 |
| 2 | 18AWG Wire | Molex_KK-396_A-41791-0002_1x02_P3.96mm_Vertical | J11, J21 |
| 3 | Jumper_NO_Small | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | JP11, JP12, JP13 |
| 1 | 3m | R_2010_5025Metric | RS1 |
| 2 | 100 | R_0805_2012Metric | RS11, RS12 |
| 1 | SW_Push | SW_Push_1P1T_NO_6x6mm_H9.5mm | SW11 |
| 2 | DZ_11V | D_SOD-123 | D11, D21 |
| 2 | LED | LED_0805_2012Metric | D12, D22 |
| 1 | US1D | D_SMA | D23 |
| 1 | 0.1u | C_1206_3216Metric | C11 |
| 3 | 1u | C_1206_3216Metric | C12, C13, C14 |
| 1 | 10n | C_0805_2012Metric | C21 |
| 1 | 100u | CP_Elec_6.3x5.8 | C22 |
| 1 | 120k | R_0805_2012Metric | R11 |
| 1 | 12k | R_0805_2012Metric | R12 |
| 1 | 1M | R_0805_2012Metric | R13 |
| 2 | 1k | R_0805_2012Metric | R14, R23 |
| 1 | 75 | R_0805_2012Metric | R15 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100k | R_0805_2012Metric | R16 |
| 1 | 47k | R_0805_2012Metric | R21 |
| 1 | 4.7k | R_0805_2012Metric | R22 |
| 1 | 10 | R_1206_3216Metric | R24 |
| 1 | 8.2k | R_0805_2012Metric | R25 |
Circuit de protection LiPo 5S design files
The KiCad project lives in the Pokibot-org/pokibot_elec repository on GitHub; these links point at the commit this page was built from.
Circuit de protection LiPo 5S: common questions
How big is the Circuit de protection LiPo 5S PCB?
The Circuit de protection LiPo 5S measures 73.7 × 43.2 mm, has 2 copper layers and is 1.67 mm thick.
How many components are on the Circuit de protection LiPo 5S?
34 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the Circuit de protection LiPo 5S design files?
From the Pokibot-org/pokibot_elec repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Circuit de protection LiPo 5S design in my own project?
Yes, under the terms of its Apache-2.0 license, which Pokibot-org chose for the repository.
More boards in pokibot_elec
STM32Carte moteur
72.6 × 73.7 mm119 parts2LApache-2.00
Interco nucleo 4couches
98.4 × 95.3 mm116 parts4LApache-2.00
Interco nucleo 4couches rounded
98.4 × 95.3 mm116 parts4LApache-2.00
PowkiBoard
70 × 84.4 mm100 parts4LApache-2.00
Interco nucleo
124.5 × 101.6 mm96 parts2LApache-2.00
STM32Interco weactH7
98.4 × 95.3 mm94 parts2LApache-2.00
Carte Alim
98.4 × 66 mm32 parts2LApache-2.00
Carte multiprise
84.3 × 98 mm10 parts2LApache-2.00
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k