HardLabs

LampBoardModule

polis-interactive·2042-WallerCreek24·Lamp/LampBoardModule/LampBoardModule.kicad_pcb

LampBoardModule PCB layout, top view — open source RP2040/RP2350 board by polis-interactive

About the LampBoardModule PCB

LampBoardModule is an open source RP2040/RP2350 PCB design by polis-interactive, published on GitHub. It is a 2-layer board measuring 85 × 54 mm, with 74 components from 29 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the L7805ABD2T-TR, SN74LVC2T45DCUR and W25Q128JVS. By type, the board carries 26 resistors, 24 capacitors, 11 diodes, 4 ICs, 3 connectors and 2 transistors.

Main components on the LampBoardModule

L7805ABD2T-TRSN74LVC2T45DCURRP2040W25Q128JVS

LampBoardModule bill of materials (BOM)

74 components, 29 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
L7805ABD2T-TR
IC1
1
SN74LVC2T45DCUR
IC2
1
RP2040
U1
1
W25Q128JVS
U2
1
CMN3406M
Q1
1
FH38P03G6
Q2
1
ABM8-272-T3
XYDBPCNANF-12MHZ
Y1
1
DS1023-1x3SF11
J1
1
284514-3
J3
1
DC-005-A250
J4
1
LD1117S33CTR
CR1
1
PEC11R-4220F-S0024
PEC11R
SW1
1
MT-0-102
SW2
3
RED
D1, D2, D3
2
YELLOW
D4, D8
5
GREEN
D5, D6, D7, D9, D10
1
D_Schottky
D11
13
100n
C1, C6, C7, C9, C12, C14, C16, C17 +5
2
12p
C2, C3
1
470u
C4
Show 9 more
QtyPartRefs
1
.33u
C5
1
10u
C8
4
1u
C10, C11, C13, C15
2
0.01u
C23, C24
13
10K
R2, R6, R7, R8, R9, R10, R17, R19 +5
4
1K
R3, R4, R30, R31
7
330
R5, R12, R13, R14, R16, R18, R28
1
100
R11
1
2.4k
R15

LampBoardModule design files

The KiCad project lives in the polis-interactive/2042-WallerCreek24 repository on GitHub; these links point at the commit this page was built from.

LampBoardModule: common questions

What microcontroller does the LampBoardModule use?

The LampBoardModule is built around the RP2040, from the RP2040/RP2350 family.

How big is the LampBoardModule PCB?

The LampBoardModule measures 85 × 54 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LampBoardModule?

74 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the LampBoardModule design files?

From the polis-interactive/2042-WallerCreek24 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the LampBoardModule design in my own project?

The repository has no license, so all rights stay with polis-interactive. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the LampBoardModule without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in 2042-WallerCreek24

Similar boards