Polihack Hush

Polyche·Polihack_Hush·polihack/polihack.kicad_pcb

Polihack Hush PCB layout, top view — open source STM32 board by Polyche

About the Polihack Hush PCB

Polihack Hush is an open source STM32 PCB design by Polyche, published on GitHub. It is a 2-layer board measuring 21.3 × 28.7 mm, with 16 components from 12 distinct parts.

Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the TL072, PAM8403D and LM78L05_TO92. By type, the board carries 4 ICs, 4 capacitors, 3 resistors, 2 connectors, 2 speakers and 1 crystal.

It belongs with the audio designs in this gallery.

From the project

First Place for an Active Noice Cancelling Speaker project done at Polihack V16

Main components on the Polihack Hush

Polihack Hush bill of materials (BOM)

16 components, 12 distinct parts.

QtyPartRefs
1
STM32F103C8Tx
U1
1
TL072
U2
1
PAM8403D
U3
1
LM78L05_TO92
U4
1
Crystal
Y1
1
Microphone connector
J1
1
Battery
J2
2
Speaker
LS1, LS2
1
1uF
C1
2
22uF
C4, C5
1
100nF
C6
3
10k
R1, R2, R3

Polihack Hush design files

The KiCad project lives in the Polyche/Polihack_Hush repository on GitHub; these links point at the commit this page was built from.

Polihack Hush: common questions

What microcontroller does the Polihack Hush use?

The Polihack Hush is built around the STM32F103C8Tx, from the STM32 family.

How big is the Polihack Hush PCB?

The Polihack Hush measures 21.3 × 28.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Polihack Hush?

16 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the Polihack Hush design files?

From the Polyche/Polihack_Hush repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Polihack Hush design in my own project?

The repository has no license, so all rights stay with Polyche. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Polihack Hush without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards