Controller
pooravkadiyan·sixtyfour-chessstream·hardware/pcb/controller.kicad_pcb
About the Controller PCB
Controller is an open source ESP32 PCB design by pooravkadiyan, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 50 mm, with 12 components from 10 distinct parts.
Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the AMS1117-3.3. By type, the board carries 4 resistors, 3 capacitors, 2 ICs, 2 connectors and 1 diode.
It belongs with the iot & wireless designs in this gallery.
From the project
Low-cost electronic chess boards for tournament streaming. Open-source KiCad PCB, ESP32 firmware, FreeCAD enclosure, Three.js digital twin. By SixtyFour.
The ChessStream board uses a simple but effective sensing approach: - 64 reed switches arranged in an 8x8 grid (one per square) - 4 multiplexers (CD74HC4067) to read all switches with minimal GPIO - ESP32 microcontroller for WiFi connectivity and processing - Neodymium magnets embedded in chess piece bases
Each CD74HC4067 has 16 channels (0-15). We map them to squares:
Main components on the Controller
Controller bill of materials (BOM)
12 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223 | U1 |
| 1 | ESP32-WROOM-32E | ESP32-WROOM-32E | U2 |
| 1 | C2765186 USB-C | USB_C_16_PowerOnly | J1 |
| 1 | C49257 TO_MATRIX | PinHeader_2x10_P2.54 | J2 |
| 1 | C2297 BLUE | LED_0805 | D1 |
| 2 | 10UF 10uF | C_0805 | C1, C2 |
| 1 | 100NF 100nF | C_0805 | C3 |
| 2 | 5.1K 5.1k | R_0805 | R1, R2 |
| 1 | 10K 10k | R_0805 | R3 |
| 1 | 330 | R_0805 | R4 |
Controller design files
The KiCad project lives in the pooravkadiyan/sixtyfour-chessstream repository on GitHub; these links point at the commit this page was built from.
Controller: common questions
What microcontroller does the Controller use?
The Controller is built around the ESP32-WROOM-32E, from the ESP32 family.
How big is the Controller PCB?
The Controller measures 80 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Controller?
12 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Controller design files?
From the pooravkadiyan/sixtyfour-chessstream repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Controller design in my own project?
Yes, under the terms of its MIT license, which pooravkadiyan chose for the repository.
Can I test firmware for the Controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in sixtyfour-chessstream
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k