Opensauce outfit

possiblyselena·opensauce-outfit·headset/pcb/pcbbracelet.kicad_pcb

Opensauce outfit PCB layout, top view — open source ESP32 board by possiblyselena

About the Opensauce outfit PCB

Opensauce outfit is an open source ESP32 PCB design by possiblyselena, published on GitHub. It is a 2-layer board measuring 76 × 29 mm, with 3 components from 3 distinct parts.

Its main chip is the ESP32-C3-DevKitM-1, from the ESP32 family. By type, the board carries 1 IC, 1 module and 1 connector.

It belongs with the robotics & motion, iot & wireless and power & battery designs in this gallery.

From the project

I took inspiration from Nasha's wing headset! Since at undercity me and my buddies made a gundam outfit, I wanted to make a outfit for Opensauce. Plus demoing will be really easy because I'll just be wearing it.

I took inspiration from Nasha's wing headset! Since at undercity me and my buddies made a gundam outfit, I wanted to make a outfit for Opensauce. Plus demoing will be really easy because I'll just be wearing it.

Things I already have: ESP32, MPU6050 (essentially the same as sen142), breadboard, wires, basic assembly things | Item Name | Price (CAD) | Quantity | Total (CAD) | Purchase Link | |-----------------------|-------------|----------|-------------|----------------| | 2pc SG90 Servo Motor | 9.99$ | 1 | 9.99$ | Amazon | | ESP32 C3 Devkit | 21.99$ | 1 | 21.99$ | Amazon | | 2pc Lipo…

Opensauce outfit, from the project README
From the project README

Main components on the Opensauce outfit

Opensauce outfit bill of materials (BOM)

3 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-C3-DevKitM-1
U1
1
SEN0142
M1
1
B2B-PH-K-S_LF__SN_
J1

Opensauce outfit design files

The KiCad project lives in the possiblyselena/opensauce-outfit repository on GitHub; these links point at the commit this page was built from.

Opensauce outfit: common questions

What microcontroller does the Opensauce outfit use?

The Opensauce outfit is built around the ESP32-C3-DevKitM-1, from the ESP32 family.

How big is the Opensauce outfit PCB?

The Opensauce outfit measures 76 × 29 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Opensauce outfit?

3 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Opensauce outfit design files?

From the possiblyselena/opensauce-outfit repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Opensauce outfit design in my own project?

The repository has no license, so all rights stay with possiblyselena. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Opensauce outfit without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards