Energy-Management using-Surveillance-Camera

prasannan-robots·Energy-Management-using-Surveillance-Camera·esp32s3_pcb/esp32s3_pcb.kicad_pcb

Energy-Management using-Surveillance-Camera PCB layout, top view — open source ESP32 board by prasannan-robots

About the Energy-Management using-Surveillance-Camera PCB

Energy-Management using-Surveillance-Camera is an open source ESP32 PCB design by prasannan-robots, published on GitHub. It is a 2-layer board measuring 80 × 80 mm, with 55 components from 28 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the Key, AMS1117-1.5 and TE_2-1734839-4_1x24-1MP_P0.5mm_Horizontal. By type, the board carries 25 resistors, 10 capacitors, 8 diodes, 5 connectors, 4 ICs and 1 transistor.

From the project

This is a project which uses camera to detect the humans and control indoor appliances

Main components on the Energy-Management using-Surveillance-Camera

ESP32-S3-WROOM-1KeyAMS1117-1.5TE_2-1734839-4_1x24-1MP_P0.5mm_Horizontal

Energy-Management using-Surveillance-Camera bill of materials (BOM)

55 components, 28 distinct parts.

QtyPartRefs
1
ESP32-S3-WROOM-1
U1
1
Key
U2
1
AMS1117-1.5
U3
1
TE_2-1734839-4_1x24-1MP_P0.5mm_Horizontal
U5
1
2N2219
Q1
1
Header2.54mm 1*8P
ReliaPro
J2
2
Conn_01x03
J3, J4
1
Conn_01x07
J5
1
ST-TF-003A
P1
1
XC6206P282MR
TOREX
2.8V1
1
OSY50402C1C
OptoSupply
LED2
8
LED
D1, D2, D3, D4, D5, D6, D7, D8
5
100pF
FH
C1, C9, C10, C11, C14
1
SMD CAP 0.1uF
C2
4
10uF
FH
C5, C6, C7, C8
8
100
R1, R4, R5, R6, R7, R8, R9, R14
2
0
R2, R21
1
10K
YAGEO
R3
1
4.7K
UniOhm
R10
1
200
UniOhm
R11
Show 8 more
QtyPartRefs
1
1K
UniOhm
R15
4
47K
ROHM Semicon
R16, R17, R18, R19
1
NC
R20
1
100k
R22
1
633k
R23
2
2k
R31, R32
1
20k
R35
1
LDR03
R38

Energy-Management using-Surveillance-Camera design files

The KiCad project lives in the prasannan-robots/Energy-Management-using-Surveillance-Camera repository on GitHub; these links point at the commit this page was built from.

Energy-Management using-Surveillance-Camera: common questions

What microcontroller does the Energy-Management using-Surveillance-Camera use?

The Energy-Management using-Surveillance-Camera is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Energy-Management using-Surveillance-Camera PCB?

The Energy-Management using-Surveillance-Camera measures 80 × 80 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Energy-Management using-Surveillance-Camera?

55 components, from 28 distinct parts. The full bill of materials is listed on this page.

Where can I download the Energy-Management using-Surveillance-Camera design files?

From the prasannan-robots/Energy-Management-using-Surveillance-Camera repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Energy-Management using-Surveillance-Camera design in my own project?

The repository has no license, so all rights stay with prasannan-robots. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Energy-Management using-Surveillance-Camera without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards