Buck-Convertor

PrathamKalgutkar·Buck-Convertor·Buck_Convertor/Buck_Convertor.kicad_pcb

Buck-Convertor PCB layout, top view — open source board by PrathamKalgutkar

About the Buck-Convertor PCB

Buck-Convertor is an open source PCB design by PrathamKalgutkar, published on GitHub. It is a 2-layer board measuring 53 × 30 mm, with 12 components from 10 distinct parts.

Other key parts include the MC34063AD. By type, the board carries 3 capacitors, 3 resistors, 2 connectors, 1 IC, 1 diode and 1 inductor.

It belongs with the power & battery designs in this gallery.

From the project

EE4102 Electronic Product Design Project

Buck Convertor designed for IIT Madras's EE4102 - "Electronic Product Design" Course Project Contained in the Repository are the KiCAD project Files, CSV file for Bill of Materials and PDF File of Final Report submitted to Course Instructor

The Project consisted of : - Design of Buck Convertor - Derivation of Component Values - Design of Circuit Schematic - Design of DRC checked PCB Board - 3D View of the Designed PCB - Estimation of Convertor Efficiency - Bill of Materials

Main components on the Buck-Convertor

Buck-Convertor bill of materials (BOM)

12 components, 10 distinct parts.

QtyPartRefs
1
MC34063AD
U1
2
Screw_Terminal_01x02
J1, J2
1
0.3
Rsc1
1
1N5819
D1
1
68uH
L1
1
270pF
C1
1
100uF
C2
1
6.8uF
C3
2
1K
R1, R3
1
10K
R2

Buck-Convertor design files

The KiCad project lives in the PrathamKalgutkar/Buck-Convertor repository on GitHub; these links point at the commit this page was built from.

Buck-Convertor: common questions

How big is the Buck-Convertor PCB?

The Buck-Convertor measures 53 × 30 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Buck-Convertor?

12 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the Buck-Convertor design files?

From the PrathamKalgutkar/Buck-Convertor repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Buck-Convertor design in my own project?

The repository has no license, so all rights stay with PrathamKalgutkar. Use it as a reference, and ask the author before reusing the design.

Similar boards