Zen alert
priyanshubishtme·zen-alert·pcb/zenalert_node.kicad_pcb
About the Zen alert PCB
Zen alert is an open source ESP32 PCB design by priyanshubishtme, published on GitHub. It is a 2-layer board measuring 70 × 65 mm, with 10 components from 8 distinct parts.
Its main chip is the ESP32-S2-Mini, from the ESP32 family. By type, the board carries 5 connectors, 3 diodes, 1 IC and 1 buzzer.
It belongs with the sensors and displays & leds designs in this gallery.
From the project
Custom 2-layer PCB designed in KiCad for the ZenAlert environmental monitoring and early-warning node.
Custom 2-layer PCB designed in KiCad for the ZenAlert environmental monitoring and early-warning node.
The ZenAlert sensor node continuously monitors ambient environmental parameters to detect smoke, hazardous gases, and rapid heat spikes indicative of early forest or industrial fires. It features local alerting (tri-color LEDs and active buzzer) as well as an OLED display for immediate on-site diagnostics.

Main components on the Zen alert
Zen alert bill of materials (BOM)
10 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S2-Mini | ESP32-S2-Mini | U1 |
| 1 | MQ135 | PinHeader_1x03_P2.54mm | J1 |
| 1 | MQ2 | PinHeader_1x03_P2.54mm | J2 |
| 1 | DHT22 | PinHeader_1x03_P2.54mm | J3 |
| 1 | OLED | SSD1306_OLED_0.96_I2C | J4 |
| 1 | I2C_EXP | PinHeader_1x04_P2.54mm | J5 |
| 1 | — | Buzzer_12x9.5RM7.6 | BZ1 |
| 3 | — | LED_D5.0mm | D1, D2, D3 |
Zen alert design files
The KiCad project lives in the priyanshubishtme/zen-alert repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/zenalert_node.kicad_pcb
- Schematicpcb/zenalert_node.kicad_sch
Zen alert: common questions
What microcontroller does the Zen alert use?
The Zen alert is built around the ESP32-S2-Mini, from the ESP32 family.
How big is the Zen alert PCB?
The Zen alert measures 70 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Zen alert?
10 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Zen alert design files?
From the priyanshubishtme/zen-alert repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Zen alert design in my own project?
The repository has no license, so all rights stay with priyanshubishtme. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Zen alert without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k