Power Unit - CanSat 2023
About the Power Unit - CanSat 2023 PCB
Power Unit - CanSat 2023 is an open source PCB design by Project-SkyFall, published on GitHub. It is a 4-layer board measuring 60.7 × 61.3 mm, with 153 components from 65 distinct parts.
Other key parts include the PCA8574PW, TS5A3159DBV, INA219AXD, AD5246BKSZ100 and TBS_UNIFY_PRO32_5G8_NANO. By type, the board carries 62 resistors, 25 capacitors, 22 transistors, 15 ICs, 8 connectors and 8 diodes.
From the project
This is repository for Czech CanSat team Project SkyFall
Main components on the Power Unit - CanSat 2023
Power Unit - CanSat 2023 bill of materials (BOM)
153 components, 65 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PCA8574PW | SOP65P640X110-16N | U201 |
| 5 | TS5A3159DBV | SOT-23-6 | U301, U701, U703, U1002, U1003 |
| 1 | INA219AXD INA219AxD | SOIC-8_3.9x4.9mm_P1.27mm | U401 |
| 1 | AD5246BKSZ100 | SOT65P210X110-6N | U501 |
| 1 | TBS_UNIFY_PRO32_5G8_NANO TBS_UNIFY_PRO32_5G8_nano | TBS UNIFY PRO32 5G8 nano | U601 |
| 1 | MP2639AGR-Z | MP2639AGRZ | U702 |
| 1 | BNO055 | LGA-28_5.2x3.8mm_P0.5mm | U801 |
| 1 | SCD41 | XDCR_SCD41-D-R2 | U901 |
| 1 | NEO-M9N | ublox_NEO | U1001 |
| 1 | ME2-02 | ME2-O2 | U1101 |
| 1 | MCP6486UT-E/OT | SOT-23-5 | U1102 |
| 14 | BC847 | SOT-23 | Q201, Q202, Q203, Q207, Q209, Q210, Q211, Q212 +6 |
| 3 | SI2305CDS-T1-BE3 | SOT-23 | Q204, Q205, Q206 |
| 5 | BC857 | SOT-23 | Q208, Q1201, Q1203, Q1204, Q1206 |
| 1 | CONN_02X04_FEMALE Conn_02x04_Female | PinSocket_2x04_P2.54mm_Vertical | J101 |
| 3 | CONN_02X02_FEMALE Conn_02x02_Female | PinSocket_2x02_P2.54mm_Vertical | J102, J103, J104 |
| 1 | CONN_01X02 Conn_01x02 | Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J501 |
| 1 | CONN_01X03 Conn_01x03 | Molex_PicoBlade_53047-0310_1x03_P1.25mm_Vertical | J502 |
| 2 | CONN_01X02 Conn_01x02 | Molex_PicoBlade_53047-0210_1x02_P1.25mm_Vertical | J503, J504 |
| 1 | Antenna_Shield | U.FL_Hirose_U.FL-R-SMT-1_Vertical | AE1001 |
Show 45 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Battery_Cell | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | BT301, BT302 |
| 1 | Backup battery | 2989 | BT1001 |
| 2 | SOLDERJUMPER_3_BRIDGED12 SolderJumper_3_Bridged12 | SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm | JP1001, JP1002 |
| 1 | DS04-254-1-04BK-SMT | SW_DIP_SPSTx04_Slide_Omron_A6S-410x_W8.9mm_P2.54mm | SW201 |
| 1 | PCM12SMTR | PCM12SMTR | SW202 |
| 1 | LaskaKit tlačítko | Tlačítko SMD LaskaKit | SW203 |
| 2 | NRBE104J3435B2J | Molex_PicoBlade_53047-0210_1x02_P1.25mm_Vertical | TH301, TH302 |
| 1 | B330A | D_SMA | D701 |
| 4 | APT2012LZGCK | LED_0805_2012Metric | D702, D703, D704, D705 |
| 1 | APT2012LSECK/J3-PRV | LED_0805_2012Metric | D706 |
| 1 | APT2012LSECK/J4-PRV | LED_0805_2012Metric | D1001 |
| 1 | ESD7351HT1G | D_SOD-323 | D1002 |
| 1 | SRP7050AA-2R2M | L_Bourns_SRP7050AA | L701 |
| 1 | 27NH 27nH | L_0805_2012Metric | L1001 |
| 4 | 10UF 10uF | C_0805_2012Metric | C201, C401, C1102, C1204 |
| 7 | 22UF 22uF | C_0805_2012Metric | C301, C302, C701, C702, C707, C1201, C1202 |
| 3 | 1UF 1uF | C_0805_2012Metric | C703, C706, C1001 |
| 7 | 0.1UF 0.1uF | C_0805_2012Metric | C704, C705, C803, C804, C901, C1002, C1101 |
| 1 | 4.7UF 4.7uF | C_0805_2012Metric | C708 |
| 1 | 120NF 120nF | C_0805_2012Metric | C801 |
| 1 | 6.8NF 6.8nF | C_0805_2012Metric | C802 |
| 1 | 10NF 10nF | C_0805_2012Metric | C1103 |
| 13 | 100K 100k | R_0805_2012Metric | R201, R202, R204, R207, R208, R209, R1201, R1202 +5 |
| 17 | 10K 10k | R_0805_2012Metric | R203, R205, R206, R210, R214, R215, R220, R221 +9 |
| 1 | 12K 12k | R_0805_2012Metric | R211 |
| 7 | 5k | R_0805_2012Metric | R212, R216, R217, R218, R219, R501, R1001 |
| 1 | 0R | R_1206_3216Metric | R213 |
| 2 | 220K 220k | R_0805_2012Metric | R302, R303 |
| 1 | PE1206FRE470R04L | R_1206_Current | R401 |
| 1 | 0R5 | R_0805_2012Metric | R701 |
| 1 | 3K16 3k16 | R_0805_2012Metric | R702 |
| 1 | 1K87 1k87 | R_0805_2012Metric | R704 |
| 1 | 1K3 1k3 | R_0805_2012Metric | R705 |
| 1 | 5K11 5k11 | R_0805_2012Metric | R706 |
| 4 | 910R | R_0805_2012Metric | R707, R708, R709, R710 |
| 1 | 143K 143k | R_0805_2012Metric | R712 |
| 1 | 82K 82k | R_0805_2012Metric | R713 |
| 1 | 820K 820k | R_0805_2012Metric | R714 |
| 1 | 75K 75k | R_0805_2012Metric | R715 |
| 1 | 27K4 27k4 | R_0805_2012Metric | R717 |
| 1 | 750R | R_0805_2012Metric | R1002 |
| 1 | 10R | R_0805_2012Metric | R1003 |
| 2 | 100R | R_0805_2012Metric | R1101, R1102 |
| 1 | 20K 20k | R_0805_2012Metric | R1103 |
| 1 | 15K 15k | R_0805_2012Metric | R1208 |
Power Unit - CanSat 2023 design files
The KiCad project lives in the Project-SkyFall/CanSat-2023 repository on GitHub; these links point at the commit this page was built from.
Power Unit - CanSat 2023: common questions
How big is the Power Unit - CanSat 2023 PCB?
The Power Unit - CanSat 2023 measures 60.7 × 61.3 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Power Unit - CanSat 2023?
153 components, from 65 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Power Unit - CanSat 2023 design files?
From the Project-SkyFall/CanSat-2023 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Power Unit - CanSat 2023 design in my own project?
The repository has no license, so all rights stay with Project-SkyFall. Use it as a reference, and ask the author before reusing the design.
More boards in CanSat-2023
Power Unit 2
60.7 × 61.3 mm92 parts4LNo license6
ESP32Control Unit - CanSat 2023
80 × 80 mm82 parts4LNo license6
Side Unit - CanSat 2023
73.5 × 90 mm54 parts2LNo license6
Raspberry PiGround Station 2023
145 × 120 mm10 parts2LNo license6
Fake Can
65 × 75 mm5 parts2LNo license6
Gstation LoRa
26.8 × 21.8 mm4 parts2LNo license6
Gstation stepdown
33.5 × 18.5 mm3 parts2LNo license6
Side switch
18.2 × 0 mm3 parts2LNo license6