Control Unit - CanSat 2023
About the Control Unit - CanSat 2023 PCB
Control Unit - CanSat 2023 is an open source ESP32 PCB design by Project-SkyFall, published on GitHub. It is a 4-layer board measuring 80 × 80 mm, with 82 components from 44 distinct parts.
Its main chip is the ESP32-MINI-1, from the ESP32 family. Other key parts include the CP2102N-AXX-XQFN24, DS18B20, BME280, RFM96W-433S2 and MAX1626ESA+T. By type, the board carries 29 resistors, 17 capacitors, 9 connectors, 8 transistors, 7 ICs and 5 diodes.
From the project
This is repository for Czech CanSat team Project SkyFall
Main components on the Control Unit - CanSat 2023
Control Unit - CanSat 2023 bill of materials (BOM)
82 components, 44 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CP2102N-AXX-XQFN24 CP2102N-Axx-xQFN24 | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U201 |
| 1 | ESP32-MINI-1 | ESP32-MINI-1 | U202 |
| 1 | DS18B20 | TO-92_Inline | U301 |
| 1 | BME280 | Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U302 |
| 1 | RFM96W-433S2 | HOPERF_RFM9XW_SMD | U401 |
| 1 | MAX1626ESA+T | SOIC127P600X175-8N | U501 |
| 1 | PT7C4339 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U701 |
| 4 | SI2305CDS-T1-BE3 | SOT-23 | Q201, Q203, Q207, Q501 |
| 4 | BC847 | SOT-23 | Q202, Q204, Q205, Q206 |
| 1 | ECS-.327-6-34B-C ECS-.327-6-34B-C-TR | ECX-31B | Y701 |
| 1 | CONN_02X04_MALE Conn_02x04_Male | PinHeader_2x04_P2.54mm_Vertical | J101 |
| 3 | CONN_02X02_MALE Conn_02x02_Male | PinHeader_2x02_P2.54mm_Vertical | J102, J103, J104 |
| 3 | 009155004541006 | 009155004541006 | J105, J106, J107 |
| 1 | USB4110-GF-A | USB4110GFA | J201 |
| 1 | Micro_SD_Card 823-046 | DS1139-05 | J601 |
| 1 | Antenna_Shield | U.FL_Hirose_U.FL-R-SMT-1_Vertical | AE401 |
| 1 | Backup battery | 2989 | BT701 |
| 1 | DS04-254-1-03BK-SMT | SW_DIP_SPSTx03_Slide_Omron_A6S-310x_W8.9mm_P2.54mm | SW201 |
| 2 | LaskaKit tlačítko | Tlačítko SMD LaskaKit | SW202, SW203 |
| 1 | SBR3U40S1F-7 | D_SOD-123F | D201 |
Show 24 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | APT2012LSECK/J4-PRV | LED_0805_2012Metric | D202, D203 |
| 1 | SP0503BAHT | SOT-143 | D204 |
| 1 | B330A | D_SMA | D501 |
| 1 | CDRH125NP-220MC | CDRH125101MC | L501 |
| 2 | 10UF 10uF | C_0805_2012Metric | C201, C206 |
| 2 | 1UF 1uF | C_0805_2012Metric | C202, C208 |
| 1 | 680UF 680uF | CP_Elec_6.3x7.7 | C203 |
| 8 | 0.1UF 0.1uF | C_0805_2012Metric | C204, C205, C207, C301, C302, C303, C504, C601 |
| 2 | TPSB686K010R0600 | CP_EIA-3528-21_Kemet-B | C501, C502 |
| 1 | 0.47UF 0.47uF | C_0805_2012Metric | C503 |
| 1 | 293D227X9010D2TE3 | CP_EIA-7343-31_Kemet-D | C505 |
| 1 | 1k | R_0805_2012Metric | R201 |
| 1 | 22K1 22k1 | R_0805_2012Metric | R202 |
| 4 | 100K 100k | R_0805_2012Metric | R203, R209, R214, R221 |
| 8 | 10K 10k | R_0805_2012Metric | R204, R205, R206, R210, R211, R223, R224, R226 |
| 1 | 47K5 47k5 | R_0805_2012Metric | R207 |
| 1 | 27K 27k | R_0805_2012Metric | R208 |
| 1 | 47K 47k | R_0805_2012Metric | R212 |
| 2 | 0R | R_1206_3216Metric | R213, R502 |
| 2 | 750R | R_0805_2012Metric | R215, R216 |
| 3 | 5K1 5k1 | R_0805_2012Metric | R217, R218, R219 |
| 3 | 5k | R_0805_2012Metric | R220, R222, R225 |
| 1 | 4K7 4k7 | R_0805_2012Metric | R301 |
| 1 | PE1206FRE470R04L | R_1206_Current | R501 |
Control Unit - CanSat 2023 design files
The KiCad project lives in the Project-SkyFall/CanSat-2023 repository on GitHub; these links point at the commit this page was built from.
Control Unit - CanSat 2023: common questions
What microcontroller does the Control Unit - CanSat 2023 use?
The Control Unit - CanSat 2023 is built around the ESP32-MINI-1, from the ESP32 family.
How big is the Control Unit - CanSat 2023 PCB?
The Control Unit - CanSat 2023 measures 80 × 80 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Control Unit - CanSat 2023?
82 components, from 44 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Control Unit - CanSat 2023 design files?
From the Project-SkyFall/CanSat-2023 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Control Unit - CanSat 2023 design in my own project?
The repository has no license, so all rights stay with Project-SkyFall. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Control Unit - CanSat 2023 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in CanSat-2023
Power Unit - CanSat 2023
60.7 × 61.3 mm153 parts4LNo license6
Power Unit 2
60.7 × 61.3 mm92 parts4LNo license6
Side Unit - CanSat 2023
73.5 × 90 mm54 parts2LNo license6
Raspberry PiGround Station 2023
145 × 120 mm10 parts2LNo license6
Fake Can
65 × 75 mm5 parts2LNo license6
Gstation LoRa
26.8 × 21.8 mm4 parts2LNo license6
Gstation stepdown
33.5 × 18.5 mm3 parts2LNo license6
Side switch
18.2 × 0 mm3 parts2LNo license6
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Racer
36 × 50.2 mm70 parts4LApache-2.03.8k