10 open source boards using the SCD41
Real designs built with the SCD41, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Air quality sensor
roepkefeller
50.8 × 45 mm75 parts4LNo license59- schematic only · 37 partsRP2040/RP2350
Boardsmith
ForestHubAI
37 partsAGPL-3.037 ESP32
AirSensor for-HomeAssistant
MarcFinns
70 × 70 mm25 parts2LNo license8Power Unit - CanSat 2023
Project-SkyFall
60.7 × 61.3 mm153 parts4LNo license6ESP32
HomeAssitantESP32Node
JoelEB
207.4 × 111.6 mm32 parts2LNo license0ESP32
Airnode s3
AskAlice
70 × 50 mm31 parts2LNo license0Wearable air quality
AMA-Labs
20.9 × 22.6 mm10 parts2LNo license0- schematic only · 37 partsRP2040/RP2350
BoardSmith
YashJanakiram
37 partsAGPL-3.00 Power Unit 2
Project-SkyFall
60.7 × 61.3 mm92 parts4LNo license6STM32
GrainGuard — In-Silo Grain Condition Probe
jayis1
26.9 × 45.9 mm21 parts4LNo license0
How designs wire the SCD41
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the SCD41 connects to, and the resistors, capacitors and other passives placed on it.
- The VDDH pin has a decoupling capacitor on 3 of 4 designs, most often 100 nF (then 4.7 µF).
- The VDD pin has a decoupling capacitor on 2 of 5 designs, most often 1 µF (then 100 nF).
- The SCL pin has a pull-up to 3.3V on 2 of 4 designs, most often 4.7 kΩ (then 10 kΩ).
- The SDA pin has a pull-up to 3.3V on 2 of 4 designs, most often 4.7 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| DNCpin 1, 2, 3, 4, 5, 8, 11, 12, 13, 14, 15, 16, 17, 18 | Connected to: Not connected 85% | — |
| GNDpin 6, 20, 21 | Connected to: GND 92% | — |
| VDDpin 7 | Connected to: 3.3V 60% · GND 20% · a signal 20% |
|
| SCLpin 9 | Connected to: The microcontroller 50% · not connected 25% |
|
| SDApin 10 | Connected to: The microcontroller 50% · not connected 25% |
|
| VDDHpin 19 | Connected to: 3.3V 75% · a signal 25% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Air quality sensor by roepkefeller, AirSensor for-HomeAssistant by MarcFinns, Power Unit - CanSat 2023 by Project-SkyFall and Wearable air quality by AMA-Labs.
The SCD41 in open source designs
The gallery holds 10 open source boards using the SCD41 from 9 GitHub repositories; a typical one measures about 60.7 × 55.7 mm and carries around 35 components.
50% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is Air quality sensor by roepkefeller.
Parts used alongside the SCD41
Microcontrollers on boards using the SCD41
What boards using the SCD41 are built for
SCD41: common questions
Where can I find a SCD41 reference design?
Each of the 10 boards on this page is a real design using the SCD41. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SCD41 VDDH pin?
The VDDH pin has a decoupling capacitor on 3 of 4 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 6 open source designs using the SCD41.
What decoupling capacitors do designs use on the SCD41 VDD pin?
The VDD pin has a decoupling capacitor on 2 of 5 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the SCD41.
What pull-up resistor is used on the SCD41 SCL pin?
The SCL pin has a pull-up to 3.3V on 2 of 4 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 6 open source designs using the SCD41.
What parts are used alongside the SCD41?
The AMS1117-3.3, BME680, RP2040, SHT40 and SSD1306 appear in the most repositories here.
Which microcontrollers do boards using the SCD41 use?
Most are built on ESP32 (4), RP2040/RP2350 (2) and STM32 (1).
How big is a typical board using the SCD41?
The median is 60.7 × 55.7 mm, and 50% are two-layer designs.
What is the most popular open source board using the SCD41?
By GitHub stars, Air quality sensor by roepkefeller, with 59 stars.
Can I simulate one of these boards using the SCD41 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.