Encoder to i2c tssop20.kicad pro panelized

prosper00·Encoder-i2c·i2c-master/hardware/TSSOP20/Production/encoder-to-i2c-tssop20.kicad_pro_panelized.kicad_pcb

Encoder to i2c tssop20.kicad pro panelized PCB layout, top view — open source RISC-V board by prosper00

About the Encoder to i2c tssop20.kicad pro panelized PCB

Encoder to i2c tssop20.kicad pro panelized is an open source RISC-V PCB design by prosper00, published on GitHub under the MIT license. It is a 2-layer board measuring 31.8 × 35.6 mm, with 39 components from 9 distinct parts.

Its main chip is the CH32V003FXPX, from the RISC-V family. By type, the board carries 20 resistors, 12 diodes, 4 capacitors, 1 IC, 1 connector and 1 switch.

From the project

ch32v003 i2c backpack firmware to convert a rotary encoder to an i2c slave device

simple ch32v003 firmware to read a rotary encoder input device, and convert it to i2c.

Usage / notes - configured for a CH32V003 SOP8 package - encoder inputs are connected to PA1 and PA2 - encoder pushbutton is connected to PC4 - all encoder pins are externally RC debounced and pulled up [ see /hardware for schematic ] - device is configured as an i2c slave device on address 0x09. - 'read' two bytes: the first byte is the rotation value, and the second byte indicates whether the button has been pressed - values are reset to zero after a read - no software debounce or acceleration scaling…

Main components on the Encoder to i2c tssop20.kicad pro panelized

Encoder to i2c tssop20.kicad pro panelized bill of materials (BOM)

39 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CH32V003FXPX
CH32V003FxPx
U2
1
Conn
J1
1
RotaryEncoder_Switch
SW1
12
LED
D1, D2, D3, D4, D5, D6, D7, D8 +4
4
100NF
100nF
C1, C2, C3, C4
3
100kΩ
R1, R2, R3
3
10kΩ
R4, R5, R6
2
∞
R7, R8
12
1k
R9, R10, R11, R12, R13, R14, R15, R16 +4

Encoder to i2c tssop20.kicad pro panelized design files

The KiCad project lives in the prosper00/Encoder-i2c repository on GitHub; these links point at the commit this page was built from.

Encoder to i2c tssop20.kicad pro panelized: common questions

What microcontroller does the Encoder to i2c tssop20.kicad pro panelized use?

The Encoder to i2c tssop20.kicad pro panelized is built around the CH32V003FXPX, from the RISC-V family.

How big is the Encoder to i2c tssop20.kicad pro panelized PCB?

The Encoder to i2c tssop20.kicad pro panelized measures 31.8 × 35.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Encoder to i2c tssop20.kicad pro panelized?

39 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Encoder to i2c tssop20.kicad pro panelized design files?

From the prosper00/Encoder-i2c repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Encoder to i2c tssop20.kicad pro panelized design in my own project?

Yes, under the terms of its MIT license, which prosper00 chose for the repository.

Can I test firmware for the Encoder to i2c tssop20.kicad pro panelized without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.

More boards in Encoder-i2c

Similar boards