13 open source boards using the CH32V003FxPx
Real designs built with the CH32V003FxPx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RISC-V
Euroknob
mitxela
24 × 79 mm23 parts2LNo license20RISC-V
Wall
rmingon
100 × 100 mm39 parts2LNo license3RISC-V
Ch32v006-dev board
rmingon
25 × 41.3 mm26 parts2LNo license3RISC-V
00314S2D-ASCII Display Module
ADBeta
24.8 × 20.8 mm15 parts2LMIT2RISC-V
GateCrasher-CH32V
rmingon
20 × 40 mm12 parts2LMIT1RISC-V
Iw18ch32v003
frytkisasmaczne
100 × 70 mm120 parts2LNo license0RISC-V
Encoder to i2c tssop20.kicad pro
prosper00
34.5 × 33.3 mm40 parts2LMIT0RISC-V
CHeepCore-HandSolder
VollstaendigerName
32 × 18.3 mm15 parts2LCC-BY-NC-4.00RISC-V
Encoder to i2c tssop20.kicad pro panelized
prosper00
31.8 × 35.6 mm39 parts2LMIT0RISC-V
Slaveboard
Magnetile
90.5 × 87.8 mm19 parts4LMIT0RISC-V
Psram addon
Stary2001
22.8 × 23.9 mm16 parts2LCERN-OHL-P-2.02RISC-V
Softswitcher module sw4
oldsheeep3
40 × 100 mm15 parts2LGPL-2.00RISC-V
CH32V003F4P6
jay94ks
18.2 × 25.4 mm8 parts2LMIT0
How designs wire the CH32V003FxPx
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the CH32V003FxPx connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 11 of 12 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VSSpin 7 | Connected to: GND 100% | — |
| VDDpin 9 | Connected to: 3.3V 92% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Euroknob by mitxela, Ch32v006-dev board by rmingon, Wall by rmingon and 00314S2D-ASCII Display Module by ADBeta.
The CH32V003FxPx in open source designs
The gallery holds 13 open source boards using the CH32V003FxPx from 12 GitHub repositories; a typical one measures about 31.8 × 40 mm and carries around 19 components.
92% are two-layer designs, the rest use four layers or more, and 62% carry an open source license.
The most starred is Euroknob by mitxela.
Microcontrollers on boards using the CH32V003FxPx
What boards using the CH32V003FxPx are built for
CH32V003FxPx: common questions
Where can I find a CH32V003FxPx reference design?
Each of the 13 boards on this page is a real design using the CH32V003FxPx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the CH32V003FxPx VDD pin?
The VDD pin has a decoupling capacitor on 11 of 12 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 12 open source designs using the CH32V003FxPx.
Which microcontrollers do boards using the CH32V003FxPx use?
Most are built on RISC-V (13).
How big is a typical board using the CH32V003FxPx?
The median is 31.8 × 40 mm, and 92% are two-layer designs.
What is the most popular open source board using the CH32V003FxPx?
By GitHub stars, Euroknob by mitxela, with 20 stars.
Can I simulate one of these boards using the CH32V003FxPx before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.