Diamond buffer amp
prydin·diamond-buffer-amp·kicad/diamond.kicad_pcb
About the Diamond buffer amp PCB
Diamond buffer amp is an open source PCB design by prydin, published on GitHub. It is a 2-layer board measuring 76.5 × 66.3 mm, with 36 components from 26 distinct parts.
Other key parts include the NE5532. By type, the board carries 12 resistors, 10 capacitors, 6 connectors, 4 transistors, 2 diodes and 1 IC.
It belongs with the audio designs in this gallery.
From the project
A simple diamond buffer amplifier
Main components on the Diamond buffer amp
Diamond buffer amp bill of materials (BOM)
36 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE5532 | DIP-8_W7.62mm | U1 |
| 1 | BD139 | TO-126-3_Vertical | Q1 |
| 1 | BD140 | TO-126-3_Vertical | Q2 |
| 1 | NJW0281G | TO-3P-3_Vertical | Q3 |
| 1 | NJW0302G | TO-3P-3_Vertical | Q4 |
| 1 | INPUT | TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J1 |
| 5 | ~ | Spade Connector | J2, J3, J4, J5, J6 |
| 1 | 1k | TRIM_T93YA103KT20 | RV1 |
| 1 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 1N4004 | D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 1 | 220u | CP_Radial_D8.0mm_P5.00mm | C1 |
| 1 | 1000u | C_Radial_D12.5mm_H20.0mm_P5.00mm | C2 |
| 1 | 22p | C_Rect_L7.2mm_W3.0mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C3 |
| 1 | 220p | C_Rect_L7.2mm_W3.0mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C4 |
| 1 | 4.7u | CP_Radial_D4.0mm_P2.00mm | C5 |
| 3 | 100n | C_Rect_L7.2mm_W3.0mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C6, C7, C8 |
| 2 | 100u | CP_Radial_D8.0mm_P5.00mm | C11, C12 |
| 2 | 1.5k | R_Axial_DIN0414_L11.9mm_D4.5mm_P20.32mm_Horizontal | R1, R2 |
| 1 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3 |
| 1 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5, R6 |
| 1 | 470 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R7 |
| 2 | 0.5 | R_Axial_DIN0414_L11.9mm_D4.5mm_P20.32mm_Horizontal | R8, R9 |
| 1 | 47k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R10 |
| 1 | 10 | R_Axial_DIN0414_L11.9mm_D4.5mm_P20.32mm_Horizontal | R11 |
| 1 | 100 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R12 |
Diamond buffer amp design files
The KiCad project lives in the prydin/diamond-buffer-amp repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/diamond.kicad_pcb
- Schematickicad/diamond.kicad_sch
Diamond buffer amp: common questions
How big is the Diamond buffer amp PCB?
The Diamond buffer amp measures 76.5 × 66.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Diamond buffer amp?
36 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Diamond buffer amp design files?
From the prydin/diamond-buffer-amp repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Diamond buffer amp design in my own project?
The repository has no license, so all rights stay with prydin. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687