Pet-Starbie
PurpleCactus2·Pet-Starbie·PCB/Starbie.kicad_pcb
About the Pet-Starbie PCB
Pet-Starbie is an open source ESP32 PCB design by PurpleCactus2, published on GitHub. It is a 2-layer board measuring 89.1 × 81.5 mm, with 9 components from 8 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. By type, the board carries 2 switches, 1 IC and 1 connector.
It belongs with the power & battery designs in this gallery.
From the project
A PCB pet created from hackclub's "Starbie" guide
Its main functions include: - A stats screen for your pet - Nap, Play and Pet actions - A shake interaction
And you can also customise your own sprite!
However, I have also added a couple of my own features: - A basic power LED indicating when starbie is on - An external battery circuit making starbie portable - A 3D printed enclosure to tie everything together
Main components on the Pet-Starbie
Pet-Starbie bill of materials (BOM)
9 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C6-DIP | U1 |
| 1 | Battery Pads | XIAO-ESP32-BATTCONTACTS | J3 |
| 1 | OLED | Display_128x64_096_I2C | 0.96" OLED |
| 1 | 10K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | 10K |
| 1 | 220 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | 220 |
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | DHT11 |
| 1 | MPU6050 | MPU6050_Module | MPU6050 |
| 2 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
Pet-Starbie design files
The KiCad project lives in the PurpleCactus2/Pet-Starbie repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Starbie.kicad_pcb
- SchematicPCB/Starbie.kicad_sch
Pet-Starbie: common questions
What microcontroller does the Pet-Starbie use?
The Pet-Starbie is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the Pet-Starbie PCB?
The Pet-Starbie measures 89.1 × 81.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pet-Starbie?
9 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pet-Starbie design files?
From the PurpleCactus2/Pet-Starbie repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pet-Starbie design in my own project?
The repository has no license, so all rights stay with PurpleCactus2. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pet-Starbie without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k