HardLabs

Rpm Reader PIC18F26J50

Pybarguen·Rpm_Reader_PIC18F26J50·Pcb_Files/Lite_Board.kicad_pcb

Rpm Reader PIC18F26J50 PCB layout, top view — open source board by Pybarguen

About the Rpm Reader PIC18F26J50 PCB

Rpm Reader PIC18F26J50 is an open source PCB design by Pybarguen, published on GitHub. It is a 2-layer board measuring 55.3 × 26 mm, with 0 components from 0 distinct parts.

It belongs with the sensors designs in this gallery.

From the project

This project uses PIC18F26J50 to read RPM using an encoder sensor witn a simple DC motor.

The objetive of this project is to change the speed of a motor using the PWM and read the RPM using a sensor encoder

Download the files a create a new project on MPLAB IDE.

1 -PIC18F26J50 1- ST7735 128X160 TFT Dispplay 1- F249 Speed sensor module 1- FF030 DC Motor 3V - 6V 1- AMS1117 3.3 Voltaje regulator 1- Button N.O 1- Mosfet IRF634A 1- 2N3904 or 2N2222 Transistor 1- PC817 optocoupler 1- Pickit2 or recent version 2- capacitor 10uF 2- 1N4004 diode 2- 220 Ohm Resistor 3- 10K Ohm Resistor

Rpm Reader PIC18F26J50, from the project README
From the project README

Rpm Reader PIC18F26J50 design files

The KiCad project lives in the Pybarguen/Rpm_Reader_PIC18F26J50 repository on GitHub; these links point at the commit this page was built from.

Rpm Reader PIC18F26J50: common questions

How big is the Rpm Reader PIC18F26J50 PCB?

The Rpm Reader PIC18F26J50 measures 55.3 × 26 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Rpm Reader PIC18F26J50?

0 components, from 0 distinct parts. The full bill of materials is listed on this page.

Where can I download the Rpm Reader PIC18F26J50 design files?

From the Pybarguen/Rpm_Reader_PIC18F26J50 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Rpm Reader PIC18F26J50 design in my own project?

The repository has no license, so all rights stay with Pybarguen. Use it as a reference, and ask the author before reusing the design.

Similar boards