HardLabs

Smart-Home-Zisternen-Pegelmessung

Pytonballoon810·Smart-Home-Zisternen-Pegelmessung·hardware/cistern-level-interface.kicad_pcb

Smart-Home-Zisternen-Pegelmessung PCB layout, top view — open source ESP8266 board by Pytonballoon810

About the Smart-Home-Zisternen-Pegelmessung PCB

Smart-Home-Zisternen-Pegelmessung is an open source ESP8266 PCB design by Pytonballoon810, published on GitHub. It is a 2-layer board measuring 70 × 60 mm, with 8 components from 7 distinct parts.

Its main chip is the WEMOS_D1_mini_light, from the ESP8266 family. Other key parts include the MP1584EN. By type, the board carries 3 ICs, 2 connectors, 2 resistors and 1 capacitor.

It belongs with the iot & wireless designs in this gallery.

From the project

The interface board itself. The design is documented in ../docs/pcb-specification.md`** — circuit, BOM, rationale and the v1.0 → v1.1 change log. This file covers only the mechanics of working with the KiCAD project.

The interface board itself. The design is documented in ../docs/pcb-specification.md`** — circuit, BOM, rationale and the v1.0 → v1.1 change log. This file covers only the mechanics of working with the KiCAD project.

The silkscreen warnings are U2's outline crossing the board edge, which is the deliberate antenna overhang, plus reference designators overlapping the connector labels.

Main components on the Smart-Home-Zisternen-Pegelmessung

MP1584ENWEMOS_D1_mini_light

Smart-Home-Zisternen-Pegelmessung bill of materials (BOM)

8 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MP1584EN
MP1584EN_Buck_Module
U1
1
WEMOS_D1_mini_light
U2
1
PinHeader_1x10_P2.54mm_Vertical
U3
2
TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal
J1, J2
1
C_0805_2012Metric_Pad1.18x1.45mm_HandSolder
C3
1
R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal
R1
1
R_0402_1005Metric_Pad0.72x0.64mm_HandSolder
R2

Smart-Home-Zisternen-Pegelmessung design files

The KiCad project lives in the Pytonballoon810/Smart-Home-Zisternen-Pegelmessung repository on GitHub; these links point at the commit this page was built from.

Smart-Home-Zisternen-Pegelmessung: common questions

What microcontroller does the Smart-Home-Zisternen-Pegelmessung use?

The Smart-Home-Zisternen-Pegelmessung is built around the WEMOS_D1_mini_light, from the ESP8266 family.

How big is the Smart-Home-Zisternen-Pegelmessung PCB?

The Smart-Home-Zisternen-Pegelmessung measures 70 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Smart-Home-Zisternen-Pegelmessung?

8 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Smart-Home-Zisternen-Pegelmessung design files?

From the Pytonballoon810/Smart-Home-Zisternen-Pegelmessung repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Smart-Home-Zisternen-Pegelmessung design in my own project?

The repository has no license, so all rights stay with Pytonballoon810. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Smart-Home-Zisternen-Pegelmessung without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

Similar boards