GPS Antenna Board
About the GPS Antenna Board
GPS Antenna Board is an open source PCB design by Queens-Rocket-Engineering-Team, published on GitHub. It is a 2-layer board measuring 50 × 65 mm, with 14 components from 13 distinct parts.
Other key parts include the SAM-M10Q. By type, the board carries 5 capacitors, 4 resistors, 3 diodes, 1 IC and 1 connector.
It belongs with the rf & radio and sensors designs in this gallery.
From the project
QRET Avionics hardware, firmware, and documentation for 2023 to 2025.
This directory contains all schematics involved in this iteration of the Avionics system.
Main components on the GPS Antenna Board
GPS Antenna Board bill of materials (BOM)
14 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SAM-M10Q | ublox_SAM-M8Q_HandSolder | U1 |
| 1 | GT8E-6P-2H(55) | CONN_GT8E-6P-2H(55) | J1 |
| 1 | White | LED_0805_2012Metric | D1 |
| 1 | Green | LED_0805_2012Metric | D2 |
| 1 | 1N5819WS | D_SOD-323_HandSoldering | D3 |
| 2 | 100nF | C_0603_1608Metric | C1, C2 |
| 1 | 1uF | C_0603_1608Metric | C3 |
| 1 | 330mF | CB5R5334HF-ZJP | C4 |
| 1 | 47uF | C_0805_2012Metric | C5 |
| 1 | 10k | R_0603_1608Metric | R1 |
| 1 | 2.2k | R_0603_1608Metric | R4 |
| 1 | 3.3k | R_0603_1608Metric | R5 |
| 1 | 100R | R_0603_1608Metric | R6 |
GPS Antenna Board design files
The KiCad project lives in the Queens-Rocket-Engineering-Team/Avionics-23-26 repository on GitHub; these links point at the commit this page was built from.
GPS Antenna Board: common questions
How big is the GPS Antenna Board?
The GPS Antenna Board measures 50 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the GPS Antenna Board?
14 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the GPS Antenna Board design files?
From the Queens-Rocket-Engineering-Team/Avionics-23-26 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the GPS Antenna Board design in my own project?
The repository has no license, so all rights stay with Queens-Rocket-Engineering-Team. Use it as a reference, and ask the author before reusing the design.
More boards in Avionics-23-26
STM32Sensors Module
69.5 × 62.6 mm184 parts4LNo license3
STM32GS Mainboard
68 × 78 mm133 parts4LNo license3
ESP32Kuhglocke GS
65 × 70 mm115 parts2LNo license3
STM32QRET 23-24 SRAD Power Module
69.5 × 62.6 mm112 parts4LNo license3
STM32QRET 23-24 SRAD Altimeter Module
69.5 × 62.6 mm92 parts4LNo license3
STM32Camera Module
69.5 × 62.6 mm80 parts2LNo license3
STM32QRET 23-24 SRAD Communications Module
69.5 × 62.6 mm69 parts4LNo license3
STM32GPS Module
69.5 × 62.6 mm61 parts4LNo license3
ScrewSwitch
56 × 74 mm16 parts2LNo license3
Backplane
69.5 × 119 mm8 parts2LNo license3
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956
ButtonsLEDs
390 × 37 mm82 parts2LApache-2.0956