ReactionWheel
About the ReactionWheel PCB
ReactionWheel is an open source STM32 PCB design by queens-satellite-team, published on GitHub. It is a 4-layer board measuring 90.2 × 95.9 mm, with 31 components from 22 distinct parts.
Its main chip is the STM32F030F4P6, from the STM32 family. Other key parts include the TMP36, TPS63060, Controller 4, LM358 and 74AUP1G08. By type, the board carries 12 resistors, 8 capacitors, 6 ICs and 5 connectors.
It belongs with the rf & radio designs in this gallery.
From the project
PCBs for satellite
Main components on the ReactionWheel
ReactionWheel bill of materials (BOM)
31 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TMP36 Controller 1 | Escon24.2 | U1 |
| 1 | STM32F030F4P6 Controller 2 | Escon24.2 | U2 |
| 1 | TPS63060 Controller 3 | Escon24.2 | U3 |
| 1 | Controller 4 | Escon24.2 | U4 |
| 1 | LM358 | DIP794W45P254L959H508Q8 | U5 |
| 1 | 74AUP1G08 LM358 | DIP794W45P254L959H508Q8 | U6 |
| 1 | PC104_Connector | pc104-connector | J1 |
| 4 | Conn_02x11_Odd_Even | 1-1734248-1-reaction-wheel-connector | J2, J3, J4, J5 |
| 2 | 0.1U 10nF | C_0603_1608Metric | C1, C10 |
| 2 | 10P 10nF | C_0603_1608Metric | C2, C4 |
| 1 | 10U 10nF | C_0603_1608Metric | C3 |
| 1 | 100N 10nF | C_0603_1608Metric | C6 |
| 2 | 10nF | C_0603_1608Metric | C8, C12 |
| 1 | 100 10k | R_0603_1608Metric | R1 |
| 1 | 10K 10k | R_0603_1608Metric | R2 |
| 2 | 10k | R_0603_1608Metric | R3, R4 |
| 2 | 5k | R_0402_1005Metric | R5, R11 |
| 1 | 100 1M | R_0603_1608Metric | R6 |
| 2 | 10K 5k | R_0402_1005Metric | R7, R9 |
| 1 | 1M | R_0603_1608Metric | R8 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 910K 1M | R_0603_1608Metric | R10 |
| 1 | 112K 1M | R_0603_1608Metric | R12 |
ReactionWheel design files
The KiCad project lives in the queens-satellite-team/pcbs repository on GitHub; these links point at the commit this page was built from.
ReactionWheel: common questions
What microcontroller does the ReactionWheel use?
The ReactionWheel is built around the STM32F030F4P6, from the STM32 family.
How big is the ReactionWheel PCB?
The ReactionWheel measures 90.2 × 95.9 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the ReactionWheel?
31 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ReactionWheel design files?
From the queens-satellite-team/pcbs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ReactionWheel design in my own project?
The repository has no license, so all rights stay with queens-satellite-team. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ReactionWheel without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in pcbs
STM32Battery board v2
90.2 × 96 mm119 parts4LNo license1
STM32STM32 Breakout
95 × 95 mm108 parts4LNo license1
PC104 Connector Breakout Board
139.1 × 55.1 mm105 parts2LNo license1
STM32MC SunSensor
90.2 × 95.9 mm104 parts4LNo license1
STM32Antenna db
94 × 94 mm59 parts4LNo license1
STM32Comm rfb
90.2 × 95.9 mm53 parts4LNo license1
STM32MagnetorquerFinalBoard
90.2 × 95.9 mm51 parts4LNo license1
STM32Pc104-template
90.2 × 95.9 mm47 parts4LNo license1
STM32Obc db
90.2 × 95.9 mm44 parts4LNo license1
PCB10
66.7 × 61 mm15 parts2LNo license1
Camm brd
90.2 × 95.9 mm8 parts2LNo license1
Similar boards
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32Module 16S
stuartpittaway
71.1 × 89.6 mm113 parts4LCC-BY-NC-4.01.1k
STM32Djinn
tzarc
192.3 × 150.5 mm216 parts2LCERN-OHL-S-2.0988
STM32Ghoul
228.6 × 79.4 mm163 parts2LCERN-OHL-S-2.0988