HardLabs

STM32 Breakout

queens-satellite-team·pcbs·OBC_Boards/STM32_Breakout/STM32_Breakout.kicad_pcb

STM32 Breakout layout, top view — open source STM32 board by queens-satellite-team
Simulate this board

About the STM32 Breakout

STM32 Breakout is an open source STM32 PCB design by queens-satellite-team, published on GitHub. It is a 4-layer board measuring 95 × 95 mm, with 108 components from 66 distinct parts.

Its main chip is the TMP36, from the STM32 family. Other key parts include the STM32F030F4P6, TPS63060, STM32L4A6ZGT6P, FSM6JSMATR and 74AUP1G08. By type, the board carries 34 capacitors, 32 resistors, 11 inductors, 10 diodes, 8 connectors and 7 ICs.

It belongs with the rf & radio and dev boards & breakouts designs in this gallery.

From the project

PCBs for satellite

Following the instructions provided here: How to Import into KiCad v6

3. On the Global Libraries tab, click on Browse Libraries (the small folder icon below)

4. Select the .lib file, then click Open.

7. Type on the filter search field, and navigate to the symbol you imported. Double-click over it to open the file.

3. On the Global Libraries tab, click on Browse Libraries (the small folder icon below)

Main components on the STM32 Breakout

TMP36STM32F030F4P6TPS63060STM32L4A6ZGT6PFSM6JSMATR74AUP1G08

STM32 Breakout bill of materials (BOM)

108 components, 66 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TMP36
MCP7940NT-I_MS
U1
1
STM32F030F4P6
MCP9808
U2
1
TPS63060
BU33SA5WGWZ-E2-qsat-symb
U3
1
STM32L4A6ZGT6P
U4
1
FSM6JSMATR
U5
1
74AUP1G08
MR25H10MDF
U6
1
TPS63060
FT231XS-R
U7
1
Q_PMOS_DGS
Q1
1
Conn_02x20_Odd_Even
J1
2
1050171001
J2, J3
2
105017-1001
J4, J8
2
SSQ-105-03-T-D
J5, J6
1
ST1W008S4ER1500-MicroSDConnector
J7
1
MAX4372FESA+
MAX4372F1
2
CM9V-T1A
O1, O2
1
GF-123-0054
S1
1
Conn_02x05_Odd_Even
SW_PORT1
7
RED
D1, D2, D4, D5, D6, D7, D8
1
10V
D3
2
GREEN
D9, D10
Show 46 more
QtyPartRefs
1
C64181
100R @ 100 MHz
FB1
1
C2988088
100R @ 100 MHz
FB2
9
100R @ 100 MHz
FB3, FB4, FB5, FB6, FB7, FB8, FB9, FB10 +1
1
0.1U
1uF
C1
1
10P
10uF
C2
1
10U
18pF
C3
1
10P
18pF
C4
1
10U
22uF
C5
1
100N
4.7u
C6
1
10N
4.7u
C7
10
100n
C8, C9, C12, C13, C15, C23, C26, C30 +2
1
0.1U
4.7u
C10
7
0.1U
100n
C11, C14, C16, C17, C18, C19, C20
1
0.1U
1u
C21
1
22N
100n
C22
1
1NF
4.74pF
C24
1
4.74pF
C25
1
10uF
C27
1
0.1uF
C28
1
4.7u
C29
2
47pF
C33, C34
1
100
10k
R1
2
10K
2k2
R2, R9
3
2k2
R3, R5, R13
1
10k
R4
1
100
20k
R6
1
10K
10k
R7
1
20m
R8
1
910K
10k +-1%
R10
1
32.5k +-1%
R11
1
112K
2k2
R12
2
47k
R14, R17
1
681K
47k
R15
1
280K
0R
R16
1
33
R18
1
63.2K
47k
R19
1
560K
10k
R20
1
100K
47k
R21
1
681K
10k
R22
1
240K
0R
R23
1
10k +-1%
R24
2
330
10k
R25, R26
3
2.2K
2k2
R27, R30, R31
1
2.2K
27
R28
1
0.1
27
R29
1
330
0R
R32

STM32 Breakout design files

The KiCad project lives in the queens-satellite-team/pcbs repository on GitHub; these links point at the commit this page was built from.

STM32 Breakout: common questions

What microcontroller does the STM32 Breakout use?

The STM32 Breakout is built around the TMP36, from the STM32 family.

How big is the STM32 Breakout?

The STM32 Breakout measures 95 × 95 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the STM32 Breakout?

108 components, from 66 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the STM32 Breakout design files?

From the queens-satellite-team/pcbs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the STM32 Breakout design in my own project?

The repository has no license, so all rights stay with queens-satellite-team. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32 Breakout without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in pcbs

Similar boards