16 open source boards using the TMP36

Real designs built with the TMP36, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

How designs wire the TMP36

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TMP36 connects to, and the resistors, capacitors and other passives placed on it.

  • The VOUT pins have a capacitor to GND on 3 of 7 designs, most often 100 nF (then 1 µF).
VOUTpin 1, 2Connected to: The microcontroller 29% · 3.3V 36%
  • Capacitor to GND on 43% · 100 nF (4), 1 µF (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Isb adaptor by Safecast, Battery board v2 by queens-satellite-team, Final pcb by cshieldsce and DualSense by hollowmaster1496.

The TMP36 in open source designs

The gallery holds 16 open source boards using the TMP36 from 8 GitHub repositories; a typical one measures about 90.2 × 95.9 mm and carries around 51 components.

56% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is Isb adaptor by Safecast.

Parts used alongside the TMP36

Microcontrollers on boards using the TMP36

TMP36: common questions

Where can I find a TMP36 reference design?

Each of the 16 boards on this page is a real design using the TMP36. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TMP36 VOUT pin connected?

The VOUT pins have a capacitor to GND on 3 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the TMP36.

Which microcontrollers do boards using the TMP36 use?

Most are built on STM32 (8), AVR/Arduino (2) and ESP32 (1).

How big is a typical board using the TMP36?

The median is 90.2 × 95.9 mm, and 56% are two-layer designs.

What is the most popular open source board using the TMP36?

By GitHub stars, Isb adaptor by Safecast, with 7 stars.

Can I simulate one of these boards using the TMP36 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part