BuckConv
QUT-EESS·OmniBot·Electronics/Buck Converter/BuckConv.kicad_pcb
About the BuckConv PCB
BuckConv is an open source PCB design by QUT-EESS, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 25 × 20.2 mm, with 16 components from 13 distinct parts.
Other key parts include the AP_1539. By type, the board carries 7 capacitors, 4 resistors, 2 connectors, 1 IC, 1 diode and 1 inductor.
It belongs with the robotics & motion designs in this gallery.
From the project
EESS Modular Robotics Platform
An open source modular robotics platform designed with KiCAD and FreeCAD. Custom designed Chassis designed to be laser cut/3d printed/CnC Milled. Custom fit stepper motor mounts with embedded motor controller PCB.
Main Processor unit consists of a Raspberry Pi A+ for path planning and general computation. An STM32 ARM microcontroller system controller will handle the stepper motor control via communication with the RPi A+ board and motor controllers.

Main components on the BuckConv
BuckConv bill of materials (BOM)
16 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP_1539 | BuckConv | U1 |
| 1 | CONN_01X03 | Pin_Header_Straight_1x03 | P1 |
| 1 | CONN_01X02 | Socket_Strip_Straight_1x02 | P2 |
| 1 | D_Schottky | SOD-123 | D1 |
| 1 | INDUCTOR | Inductor1 | L1 |
| 1 | 470u | c_elec_8x10 | C1 |
| 4 | 0.1u | C_0805_HandSoldering | C2, C3, C4, C6 |
| 1 | 5600p | C_1206_HandSoldering | C5 |
| 1 | 470u | c_elec_8x10.5 | C7 |
| 1 | 3.9k | R_0805_HandSoldering | R1 |
| 1 | 100k | R_0805_HandSoldering | R2 |
| 1 | 6.8k | R_0805_HandSoldering | R3 |
| 1 | 1.3k | R_0805_HandSoldering | R4 |
BuckConv design files
The KiCad project lives in the QUT-EESS/OmniBot repository on GitHub; these links point at the commit this page was built from.
BuckConv: common questions
How big is the BuckConv PCB?
The BuckConv measures 25 × 20.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BuckConv?
16 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the BuckConv design files?
From the QUT-EESS/OmniBot repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the BuckConv design in my own project?
Yes, under the terms of its GPL-3.0 license, which QUT-EESS chose for the repository.
More boards in OmniBot
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979