HardLabs

Hardware pcb kicad industrial

r-menegueli·hardware-pcb-kicad-industrial·kicad_project/esp32_industrial_io_rs485.kicad_pcb

Hardware pcb kicad industrial layout, top view — open source ESP32 board by r-menegueli

About the Hardware pcb kicad industrial

Hardware pcb kicad industrial is an open source ESP32 PCB design by r-menegueli, published on GitHub. It is a 2-layer board measuring 100 × 80 mm, with 1 components from 1 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N8R2, from the ESP32 family.

It belongs with the iot & wireless designs in this gallery.

From the project

Repositório de Engenharia Eletrônica e Design de Placas de Circuito Impresso (PCB Layout em KiCad EDA) para um Controlador Industrial IoT & Remota Modbus RTU/TCP com alimentação 24 VDC, entradas digitais opto-isoladas, leitura de sensores industriais 4–20 mA (ADC 16 bits) e saída

Repositório de Engenharia Eletrônica e Design de Placas de Circuito Impresso (PCB Layout em KiCad EDA) para um Controlador Industrial IoT & Remota Modbus RTU/TCP com alimentação 24 VDC, entradas digitais opto-isoladas, leitura de sensores industriais 4–20 mA (ADC 16 bits) e saídas a relé.

Main components on the Hardware pcb kicad industrial

ESP32-S3-WROOM-1-N8R2

Hardware pcb kicad industrial bill of materials (BOM)

1 components, 1 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1-N8R2
Espressif
U1

Hardware pcb kicad industrial design files

The KiCad project lives in the r-menegueli/hardware-pcb-kicad-industrial repository on GitHub; these links point at the commit this page was built from.

Hardware pcb kicad industrial: common questions

What microcontroller does the Hardware pcb kicad industrial use?

The Hardware pcb kicad industrial is built around the ESP32-S3-WROOM-1-N8R2, from the ESP32 family.

How big is the Hardware pcb kicad industrial?

The Hardware pcb kicad industrial measures 100 × 80 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hardware pcb kicad industrial?

1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hardware pcb kicad industrial design files?

From the r-menegueli/hardware-pcb-kicad-industrial repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Hardware pcb kicad industrial design in my own project?

The repository has no license, so all rights stay with r-menegueli. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Hardware pcb kicad industrial without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards