33 open source boards using the ESP32-S3-WROOM-1-N8R2
Real designs built with the ESP32-S3-WROOM-1-N8R2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
PETER
dennowiggle
180 × 110 mm371 parts4LLGPL-2.14ESP32
Main Board
omniframe-art
100 × 62.5 mm100 parts4LNo license4ESP32
PocketLab-Card
Jebroa77485.6 × 54 mm250 parts4LNo license2ESP32
Bramble
justinlindh
96 × 50 mm84 parts2LMIT2- schematic only · 9 partsESP32
Kicad iot sensor board
bradleybeatz1313
9 partsNo license2 ESP32
Gpsrx
bgelb
152.4 × 92 mm283 parts6LNo license1RP2040/RP2350
DeltaRho
valleyquail
68 × 75 mm114 parts4LNo license1ESP32
RoomThermostat
henkjannl
90 × 54 mm62 parts2LMIT1ESP32
Esp32s3-usb imu board
kanishqtanwar35-hub
65 × 45 mm33 parts2LNo license1ESP32
E002 rocker
oscar-wik
56.5 × 216 mm213 parts4LNo license0ESP32
Abx motion
levdan159
157 × 105 mm188 parts4LNo license0ESP32
Micromouse
MukeshSethy
100 × 120 mm177 parts4LNo license0ESP32
Ataxia-Monitor
Sajeevanveeriah
90 × 60 mm138 parts4LUnlicense0ESP32
Exhaust mic
HasiKe
72 × 55 mm133 parts4LNo license0ESP32
Agentdeck
Brillar0101
150 × 110 mm119 parts2LMIT0ESP32
Vaporizer
itspolly
73.8 × 73.9 mm108 parts2LUnlicense0ESP32
Esp32MC
mauimart
96 × 60 mm99 parts4LNo license0ESP32
NeuralCard
Brillar0101
85.6 × 54 mm66 parts2LCERN-OHL-P-2.00ESP32
PCB SALUS V3
LeoSole423
100 × 100 mm63 parts2LNo license0ESP32
NeuralCard
Brillar0101
85.6 × 54 mm61 parts2LCERN-OHL-P-2.00ESP32
Water kettle
dmatscheko
59.8 × 127.4 mm53 parts2LNo license0ESP32
MotoLoRaXWaffles
Bastiti
81.2 × 53.5 mm43 parts2LNo license0ESP32
Bussysteme und-Sensorik-ESP32-Projekt
SFMonsun
111.7 × 63.8 mm32 parts4LNo license0ESP32
Airnode s3
AskAlice
70 × 50 mm31 parts2LNo license0ESP32
Hardware pcb kicad industrial
r-menegueli
100 × 80 mm1 parts2LNo license0- schematic only · 9 partsESP32
Enviro node esp32s3
sharanyasrinivas-jfk
9 partsNo license0 ESP32
PocketLab-Card pcba routing wip
Jebroa77485.6 × 54 mm246 parts4LNo license2ESP32
Test 09. With ESP module
henkjannl
90 × 54 mm62 parts2LMIT1ESP32
Roomnode s3
AskAlice
65 × 50 mm31 parts2LNo license0ESP32
PocketLab-Card routing working
Jebroa77485.6 × 54 mm243 parts4LNo license2ESP32
Phase3-manager
udaravima
100 × 80 mm80 parts2LGPL-3.01ESP32
S3 cam
ajwock
44.5 × 33 mm58 parts2LNo license14ESP32
S3 mini cam
ajwock
44.5 × 33 mm58 parts2LNo license14
How designs wire the ESP32-S3-WROOM-1-N8R2
Read from the KiCad layouts of 24 open source designs, one per repository: what each pin of the ESP32-S3-WROOM-1-N8R2 connects to, and the resistors, capacitors and other passives placed on it.
- The EN pin has a pull-up to 3.3V on 21 of 24 designs, most often 10 kΩ (then 1 kΩ).
- The EN pin has a capacitor to GND on 21 of 24 designs, most often 1 µF (then 100 nF).
- The 3V3 pin is tied to 3.3V on 21 of 24 designs (a signal on 3).
- The IO46 pin is left unconnected on 18 of 24 designs (a signal on 6).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 40, 41 | Connected to: GND 100% | — |
| 3V3pin 2 | Connected to: 3.3V 88% | — |
| ENpin 3 | Connected to: Signal 96% |
|
| IO4pin 4 | Connected to: Signal 79% · not connected 21% |
|
| IO5pin 5 | Connected to: Signal 83% · not connected 17% |
|
| IO6pin 6 | Connected to: A connector 21% |
|
| IO8pin 12 | Connected to: A connector 42% |
|
| IO46pin 16 | Connected to: Not connected 75% · a signal 25% | — |
| IO9pin 17 | Connected to: A connector 33% · not connected 25% |
|
| IO47pin 24 | Connected to: Signal 58% · not connected 42% |
|
| IO48pin 25 | Connected to: Signal 63% · not connected 38% |
|
| IO45pin 26 | Connected to: Not connected 71% · a signal 29% | — |
| IO0pin 27 | Connected to: Signal 92% |
|
26 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include S3 cam by ajwock, PETER by dennowiggle, Main Board by omniframe-art and PocketLab-Card by Jebroa774.
The ESP32-S3-WROOM-1-N8R2 in open source designs
The gallery holds 33 open source boards using the ESP32-S3-WROOM-1-N8R2 from 28 GitHub repositories; a typical one measures about 85.6 × 60 mm and carries around 80 components.
55% are two-layer designs, the rest use four layers or more, and 30% carry an open source license.
The most starred is S3 cam by ajwock.
Parts used alongside the ESP32-S3-WROOM-1-N8R2
Microcontrollers on boards using the ESP32-S3-WROOM-1-N8R2
What boards using the ESP32-S3-WROOM-1-N8R2 are built for
ESP32-S3-WROOM-1-N8R2: common questions
Where can I find a ESP32-S3-WROOM-1-N8R2 reference design?
Each of the 33 boards on this page is a real design using the ESP32-S3-WROOM-1-N8R2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the ESP32-S3-WROOM-1-N8R2 EN pin?
The EN pin has a pull-up to 3.3V on 21 of 24 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 24 open source designs using the ESP32-S3-WROOM-1-N8R2.
How is the ESP32-S3-WROOM-1-N8R2 3V3 pin connected?
The 3V3 pin is tied to 3.3V on 21 of 24 designs (a signal on 3). Counted from the KiCad layouts of 24 open source designs using the ESP32-S3-WROOM-1-N8R2.
How is the ESP32-S3-WROOM-1-N8R2 IO46 pin connected?
The IO46 pin is left unconnected on 18 of 24 designs (a signal on 6). Counted from the KiCad layouts of 24 open source designs using the ESP32-S3-WROOM-1-N8R2.
What parts are used alongside the ESP32-S3-WROOM-1-N8R2?
The USBLC6-2SC6, AP2112K-3.3, AMS1117-3.3, AP2112K-3.3TRG1 and BMP390 appear in the most repositories here.
Which microcontrollers do boards using the ESP32-S3-WROOM-1-N8R2 use?
Most are built on ESP32 (32) and RP2040/RP2350 (1).
How big is a typical board using the ESP32-S3-WROOM-1-N8R2?
The median is 85.6 × 60 mm, and 55% are two-layer designs.
What is the most popular open source board using the ESP32-S3-WROOM-1-N8R2?
By GitHub stars, S3 cam by ajwock, with 14 stars.
Can I simulate one of these boards using the ESP32-S3-WROOM-1-N8R2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.