LILYGO ESP32 SHIELD
R-Mutura·LILYGO_ESP32_SHIELD
About the LILYGO ESP32 SHIELD
LILYGO ESP32 SHIELD is an open source PCB design by R-Mutura, published on GitHub. It is a 2-layer board measuring 101 × 54.7 mm, with 47 components from 19 distinct parts.
Other key parts include the SN74HC14DR and LilyGO_ESP32_TTGO. By type, the board carries 20 resistors, 7 connectors, 7 test points, 7 capacitors, 4 diodes and 2 ICs.
It belongs with the dev boards & breakouts and sensors designs in this gallery.
From the project
LILY GO SHIELD AND BREAKOUT FOR SENSORS
Main components on the LILYGO ESP32 SHIELD
LILYGO ESP32 SHIELD bill of materials (BOM)
47 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SN74HC14DR | SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | LilyGO_ESP32_TTGO | LILLYGO_ESP32_TTGO | U2 |
| 1 | Conn. Flow4 | PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J1 |
| 1 | Conn. Flow3 | PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J2 |
| 1 | Conn. Flow2 | PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J3 |
| 1 | Conn. Flow1 | PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J4 |
| 1 | Conn. Pressure | PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J5 |
| 1 | TEMP1 | PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J6 |
| 1 | TEMP2 | PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J7 |
| 7 | RCT-0C | PROBE_PAD_1206 | TP1, TP2, TP3, TP4, TP5, TP6, TP7 |
| 4 | LED | LED_0603_1608Metric | D1, D2, D3, D4 |
| 4 | 0.1uF | C_0603_1608Metric | C1, C2, C3, C4 |
| 1 | 330uF_10V | CP_Elec_8x10.5 | C5 |
| 2 | 330uF_6V | CP_Elec_6.3x7.7 | C6, C7 |
| 4 | 10K | R_0603_1608Metric | R1, R11, R13, R20 |
| 3 | 6.8K | R_0603_1608Metric | R2, R12, R19 |
| 8 | 10K_0.25W | R_0603_1608Metric | R3, R4, R5, R6, R7, R8, R9, R10 |
| 4 | 2.2K | R_0603_1608Metric | R14, R15, R16, R17 |
| 1 | 4.7K | R_0603_1608Metric | R18 |
LILYGO ESP32 SHIELD design files
The KiCad project lives in the R-Mutura/LILYGO_ESP32_SHIELD repository on GitHub; these links point at the commit this page was built from.
LILYGO ESP32 SHIELD: common questions
How big is the LILYGO ESP32 SHIELD?
The LILYGO ESP32 SHIELD measures 101 × 54.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LILYGO ESP32 SHIELD?
47 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the LILYGO ESP32 SHIELD design files?
From the R-Mutura/LILYGO_ESP32_SHIELD repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the LILYGO ESP32 SHIELD design in my own project?
The repository has no license, so all rights stay with R-Mutura. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k