Starbie-

rafay-069·starbie-·hardware/STARBIE_CARRIER_YETI_JARVIS.kicad_pcb

Starbie- PCB layout, top view — open source board by rafay-069

About the Starbie- PCB

Starbie- is an open source PCB design by rafay-069, published on GitHub. It is a 2-layer board measuring 48 × 45 mm, with 10 components from 9 distinct parts.

Other key parts include the XIAO_ESP32_C3. By type, the board carries 4 connectors, 2 switches, 2 capacitors, 1 IC and 1 buzzer.

It belongs with the audio, sensors and iot & wireless designs in this gallery.

From the project

A 3D-printed Yeti desktop companion robot powered by an ESP32-C3 microcontroller, featuring interactive animations, environmental monitoring, voice response, and an I2S audio amplifier setup i was inspired by jarvis from ironman so instead of making it simple starie i made change

A 3D-printed Yeti desktop companion robot powered by an ESP32-C3 microcontroller, featuring interactive animations, environmental monitoring, voice response, and an I2S audio amplifier setup i was inspired by jarvis from ironman so instead of making it simple starie i made changes i wanted to be more creative

I HAVE A BUZZER THATS WHY I DIDNT ADD IT IN BOM AND ALSO I WILL BE USING SPEAKERS MAINLY

Starbie-, from the project README
From the project README

Main components on the Starbie-

Starbie- bill of materials (BOM)

10 components, 9 distinct parts.

QtyPartRefs
1
XIAO_ESP32_C3
U1
1
OLED_SSD1306
J1
1
GY-521_MPU6050
J2
1
DHT11
J3
1
INMP441_MIC
J4
1
Buzzer
BZ1
1
SW_MENU
SW1
1
SW_WAKE
SW2
2
0.1uF
C1, C2

Starbie- design files

The KiCad project lives in the rafay-069/starbie- repository on GitHub; these links point at the commit this page was built from.

Starbie-: common questions

How big is the Starbie- PCB?

The Starbie- measures 48 × 45 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Starbie-?

10 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Starbie- design files?

From the rafay-069/starbie- repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Starbie- design in my own project?

The repository has no license, so all rights stay with rafay-069. Use it as a reference, and ask the author before reusing the design.

Similar boards