HIVIS2

ranieriv·HIVIS2·hardware/hivis2.kicad_pcb

HIVIS2 PCB layout, top view — open source ESP32 board by ranieriv

About the HIVIS2 PCB

HIVIS2 is an open source ESP32 PCB design by ranieriv, published on GitHub. It is a 2-layer board measuring 65 × 50 mm, with 15 components from 12 distinct parts.

Its main chip is the ESP32_30pin, from the ESP32 family. By type, the board carries 5 connectors, 5 resistors, 2 capacitors, 1 IC, 1 buzzer and 1 switch.

It belongs with the iot & wireless, sensors and displays & leds designs in this gallery.

From the project

Self-hosted indoor air quality and acoustic monitoring system built on ESP32. Designed for schools, offices, and research environments where privacy and data ownership matter.

Self-hosted indoor air quality and acoustic monitoring system built on ESP32. Designed for schools, offices, and research environments where privacy and data ownership matter.

KiCad schematic, PCB layout, Gerber files, and BOM are in hardware/.

Built with PlatformIO (Arduino framework).

Dependencies (auto-installed via platformio.ini): - boschsensortec/bsec2 — IAQ/CO₂/VOC - olikraus/U8g2 — OLED display - bblanchon/ArduinoJson - knolleary/PubSubClient — MQTT - tzapu/WiFiManager — captive portal provisioning

HIVIS2 bill of materials (BOM)

15 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
~
U1
1
BME_688_MODULE
BME_688_Module
J1
1
INMP_441
J2
1
OLED Display
J3
1
J5019_MODULE
J5019_Module
J4
1
BATT JST
J5
1
Buzzer
BZ1
1
SW_Push
SW1
2
100NF
100nF
C1, C2
2
4.7K
R1, R2
2
100K
R3, R4
1
220
R5

HIVIS2 design files

The KiCad project lives in the ranieriv/HIVIS2 repository on GitHub; these links point at the commit this page was built from.

HIVIS2: common questions

What microcontroller does the HIVIS2 use?

The HIVIS2 is built around the ESP32_30pin, from the ESP32 family.

How big is the HIVIS2 PCB?

The HIVIS2 measures 65 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HIVIS2?

15 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the HIVIS2 design files?

From the ranieriv/HIVIS2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the HIVIS2 design in my own project?

The repository has no license, so all rights stay with ranieriv. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the HIVIS2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards