Hackpad
RAQuig·hackpad·KiCAD/hackpad.kicad_pcb
About the Hackpad PCB
Hackpad is an open source Microchip SAM PCB design by RAQuig, published on GitHub. It is a 2-layer board measuring 17.7 × 34.6 mm, with 5 components from 3 distinct parts.
Its main chip is the XIAO-SAMD21-SMD, from the Microchip SAM family. By type, the board carries 3 switches, 1 IC and 1 LED.
It belongs with the keyboards and displays & leds designs in this gallery.
From the project
Hackpad Repository for Hack Club
README: Description: This project is a very small homemade version of a Stream Deck. It has three keys that can be programmed and a small OLED display (0.91"). Why: I have always wanted to create my own technology and this project is my way in to the rest of it. I hope this project helps me learn a lot about how technology works. How to use: Connect the USB cable to a laptop, PC, or (hopefully) console to get three keybinds to be used how I used and a OLED screen for some stats (controller battery level, FPS, Stream stats, etc.)

Main components on the Hackpad
Hackpad bill of materials (BOM)
5 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-SAMD21-SMD | XIAO-Generic-Hybrid-14P-2.54-21X17.8MM | U1 |
| 3 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3 |
| 1 | SSD1306 | 128x64OLED | Brd1 |
Hackpad design files
The KiCad project lives in the RAQuig/hackpad repository on GitHub; these links point at the commit this page was built from.
- LayoutKiCAD/hackpad.kicad_pcb
- SchematicKiCAD/hackpad.kicad_sch
Hackpad: common questions
What microcontroller does the Hackpad use?
The Hackpad is built around the XIAO-SAMD21-SMD, from the Microchip SAM family.
How big is the Hackpad PCB?
The Hackpad measures 17.7 × 34.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hackpad?
5 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hackpad design files?
From the RAQuig/hackpad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Hackpad design in my own project?
The repository has no license, so all rights stay with RAQuig. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Hackpad without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416